Glenn83 19 Report post Posted March 20, 2015 A question for those who have replaced there old n cracked shock towers can you guys recommend what brand to buy?? Glenn Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted March 20, 2015 I used Dynacorn from Kentucky Mustang. Fit really well. Dave Quote Share this post Link to post Share on other sites
Protowrxs 111 Report post Posted March 20, 2015 Mine came from MustangsPlus and were good quality at least back then... been 10 years ago apparently though :-( Did passenger tower and battery tray - Pics here - http://www.protowrxs.com/Nolen/Stang/Rebuild/2006-07-24.asp Quote Share this post Link to post Share on other sites
Glenn83 19 Report post Posted March 20, 2015 Thanks for the replies, i can get some scott drake ones locally for reasonable price, i assume they would be ok... Quote Share this post Link to post Share on other sites
manley 13 Report post Posted March 21, 2015 I used Dynacorn... haven't had any issues with them. Quote Share this post Link to post Share on other sites
Rcodenewf 44 Report post Posted March 21, 2015 Ditto on the Dynacorn. Fit was great. Measure across from the opposite shock tower at several points so the replacement goes back very close to where it was. Mind you , these are notorious for sagging inwards so I used a one piece export brace for alignment in helping my install. John Quote Share this post Link to post Share on other sites
mustangmike6996 34 Report post Posted March 21, 2015 I cant remember what brand I used, got them from National Parts Depot in 2002ish. They fit pretty good. I hear Dynacorn is tough to beat though Quote Share this post Link to post Share on other sites
JTG 10 Report post Posted March 29, 2015 Dynacorn for me too. Put them in a few months ago and the fit was great. Quote Share this post Link to post Share on other sites