Paul's 69 Mach1

[paulb 112]

She came home today, Tucked away safe, now for the assembly process

[bigmal 225]

That's looking great. Now the fun stuff

[mustangstofear 608]

Nice color choice. 

[paulb 112]

Started to put her together, things that should be simple turn into a major job. Patience and breathing8-)

[paulb 112]

Little modification to the reverse lights, fitted vintage reverse/turn led inserts, turned out well

[mustangstofear 608]

Do you have resonators on there ?

[paulb 112]

1 hour ago, mustangstofear said:

Do you have resonators on there ?

Yep, 20” at the rear, With flow master 44 Mufflers, twin 3” ,little on the loud side thou

[mustangstofear 608]

You don't know what loud is until you hear mine. I've been thinking about adding some resonators if it would help 

[paulb 112]

37 minutes ago, mustangstofear said:

You don't know what loud is until you hear mine. I've been thinking about adding some resonators if it would help 

Im thinking of changing mufflers to glass packed ones, resonators will help but not that much, I found it helped more with drone and bark rather than quitening the note, mine has euro4 cats on it as well, thinking of putting spirals in there to start and see what it sounds like

[Grabber70Mach 107]

Digging the color that came out looking really good. 

[paulb 112]

5 hours ago, Grabber70Mach said:

Digging the color that came out looking really good. 

Thanks, can’t tell you how long it took to settle on it, but am happy with it

[mikee 51]

Hi Paul, 

can you tell me the color code?

 I felt in Love with it!

Thanks

[EastYorkStang 63]

Please show us the reverse lights in use ?

[paulb 112]

4 hours ago, EastYorkStang said:

Please show us the reverse lights in use ?

Hi, I will post when I have it wired, at present they are only fitted in place, if I get some time I’ll try a dummy wire up to show

[paulb 112]

On 1/21/2021 at 8:18 PM, mikee said:

Hi Paul, 

can you tell me the color code?

 I felt in Love with it!

Thanks

Hi mike, Sorry for the delay, here is the paint code , it is a standox paint code

Platinum silber 865608
formula id 4821643
it is a Porsche colour

hope this helps, it is a very nice color that has depth, mine has been flow coated which makes it look much better

[EastYorkStang 63]

6 hours ago, paulb said:

Hi, I will post when I have it wired, at present they are only fitted in place, if I get some time I’ll try a dummy wire up to show

Thanks. From the picture above they look normal. Where did you get them ? Perhaps the vendor will explain ?

 

[paulb 112]

On 1/24/2021 at 1:55 PM, EastYorkStang said:

Thanks. From the picture above they look normal. Where did you get them ? Perhaps the vendor will explain ?

 

They are from vintage leds, https://www.vintageleds.com/store/p9/64.5-70_Reverse%2FAmber_Turn_Lights.html , they are original casings, I fitted their led park light/turn signal board, 

[paulb 112]

A couple more

[paulb 112]

headlight buckets assembled, inner trims repainted and polished, just waiting on chrome trims then I’ll fit. Seatbelt brackets made and fitted, rear retractor mounts were challenging 

[paulb 112]

Converting mirrors to power, used Toyota Corolla motors with a little modification, still have to get mirrors cut

[paulb 112]

Bit of an update, side windows in, central locking in, head unit in, almost finished wiring.

[paulb 112]

Been busy building an airbox so the boss scoop is functional and engine can have clean air, taken a while, still needs painting just trying to decide either silver or black? And finished the gauges 

 

[staffy 87]

Great work on the mirrors and air box.

 That’s one sweet looking ride 

[paulb 112]

On 7/30/2021 at 7:06 AM, staffy said:

Great work on the mirrors and air box.

 That’s one sweet looking ride 

Thanks, it’s getting there slowly

[paulb 112]

Air box finished, came out pretty good