shaun071 62 Report post Posted February 9, 2015 I'm converting my 69 coupe to power disc brakes from 4 wheel manual drums. The hole for the pushrod is offset higher than the 2 mounting bolts for the original master. In the photo there is a oval line pressed in the firewall above the existing pushrod hole. Is the correct place to cut the firewall for the new booster? The booster is an aftermarket one with an adaptor bracket to fit a 69 Mustang. All the bolts line up with the existing pedal box mounts. I just want to confirm its right before I cut. Thanks Shaun Quote Share this post Link to post Share on other sites
Ridge Runner 1,112 Report post Posted February 9, 2015 Yes the hole has to be cut taller to use the power booster. Quote Share this post Link to post Share on other sites
shaun071 62 Report post Posted February 9, 2015 Thanks Ridge Runner. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted February 10, 2015 Yes..... Bob Quote Share this post Link to post Share on other sites
buening 63 Report post Posted February 11, 2015 This picture may help: Quote Share this post Link to post Share on other sites
shaun071 62 Report post Posted February 11, 2015 Thanks for the pic Buening Quote Share this post Link to post Share on other sites