DarkBuddha 107 Report post Posted January 5, 2015 I've set a deadline and been on a buying spree for a couple months in hopes that I'll be driving my '70 again for the first time in a very very very long time this year. That's my resolution, what is yours? Quote Share this post Link to post Share on other sites
ashleesmach1 28 Report post Posted January 5, 2015 just be a good person Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 5, 2015 just be a good person X2, Get the sheet metal work completed on my 69 Coupe this year. Quote Share this post Link to post Share on other sites
Chris'69Mach 23 Report post Posted January 5, 2015 Fix the slop in the 3rd member, put TCP coil overs on the front end, EFI and the 10k paint job. Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted January 5, 2015 Drive my car more than I work on it this year. Quote Share this post Link to post Share on other sites
jholmes217 65 Report post Posted January 5, 2015 Actually get the engine finished and installed. Not looking forward to the install part though. Putting a 428 in with Hooker Super Comp headers is not fun. Thinking of buying old school medieval chain-mail gloves to protect my knuckles lol! Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted January 5, 2015 Actually get the engine finished and installed. Not looking forward to the install part though. Putting a 428 in with Hooker Super Comp headers is not fun. Thinking of buying old school medieval chain-mail gloves to protect my knuckles lol! I feel your pain on that one and good luck. I think my hands have finally healed after months working on mine...lol Quote Share this post Link to post Share on other sites
sportsroof69 13 Report post Posted January 5, 2015 Break into the 5s in the 1/8. I'm probably going to do some work to the front suspension to try and help get it there, if I can squeeze it out of my budget after our house is finished. Quote Share this post Link to post Share on other sites
SA69mach 39 Report post Posted January 5, 2015 Arning drop and tru trac 3.50 into the Mach1. 15 inch Magnums with 225 series front, and 255 rear. Change out the Clutch master cylinder for a smaller bore, and the correct power brake pedal on the 70 coupe. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted January 5, 2015 Start the metal work on the 66 conv Bob Quote Share this post Link to post Share on other sites
Guillaume69 150 Report post Posted January 5, 2015 Drive from Florida to San Francisco and back in my 69, before I head back to France this summer. G Quote Share this post Link to post Share on other sites
moodster 55 Report post Posted January 5, 2015 Finish my engine rebuild and drive the wheels off my 69. david Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted January 5, 2015 not to get a speeding ticket lol and do a 5 speed conversion with upgraded rear end and bigger brakes Quote Share this post Link to post Share on other sites
Protowrxs 111 Report post Posted January 6, 2015 Running, driving my 69 Mustang Coupe for the first time since before 1995... May not have doors, fenders, bumpers, or other "accessories" but it has to be running and driving :-) Our son was born in 1995 and I know it hasn't been running since then as he reminds me often. Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted January 6, 2015 Driving it for the first time since I limped it around the block in 2012. Last time I really drove it was in 1988 or 89 Quote Share this post Link to post Share on other sites