Cobra Caliper Brackets/Baskets

[shaun071 62]

Hi All,

 

I'm looking into doing the 13" Cobra front brake upgrade on my 69 coupe. Are the Cobra calliper brackets/baskets hard to find? I've found the calliper itself is the same one fitted to Aussie BA-BF Falcons with a different bracket so I was going to source the callipers and rotors here in Oz (they're available and close to US price) to save on freight costs.

Is the Mustangsteve kit a good one to use?

 

For rear brakes I was looking at the Vintage Venom Cobra kit. Any feedback on them would be good. I was looking at their front kit as well but my wheels are close to a stock 69 offset.

 

Cheers Shaun

[shaun071 62]

Hi All,

 

I'm looking into doing the 13" Cobra front brake upgrade on my 69 coupe. Are the Cobra calliper brackets/baskets hard to find? I've found the calliper itself is the same one fitted to Aussie BA-BF Falcons with a different bracket so I was going to source the callipers and rotors here in Oz (they're available and close to US price) to save on freight costs.

Is the Mustangsteve kit a good one to use?

 

For rear brakes I was looking at the Vintage Venom Cobra kit. Any feedback on them would be good. I was looking at their front kit as well but my wheels are close to a stock 69 offset.

 

Cheers Shaun

[stangme428 33]

Hi All,

 

I'm looking into doing the 13" Cobra front brake upgrade on my 69 coupe. Are the Cobra calliper brackets/baskets hard to find? I've found the calliper itself is the same one fitted to Aussie BA-BF Falcons with a different bracket so I was going to source the callipers and rotors here in Oz (they're available and close to US price) to save on freight costs.

Is the Mustangsteve kit a good one to use?

 

For rear brakes I was looking at the Vintage Venom Cobra kit. Any feedback on them would be good. I was looking at their front kit as well but my wheels are close to a stock 69 offset.

 

Cheers Shaun

 

I have the Vintage Venom GT500 front kit and fitment was great! i had to turn my new drum hubs due to them having extra casting but that was it. I did go with 70 forged spindles from Street or Track while i was changing out my factory 69 disc spindles. i have the Baer T4 kit from Gateway Classic Mustang.. was the most cost effective 13" rear kit i could find at the time. Both kits met my budget for 14" in the front and 13" in the back... that fit within 18" GT4 wheels.

[stangme428 33]

Hi All,

 

I'm looking into doing the 13" Cobra front brake upgrade on my 69 coupe. Are the Cobra calliper brackets/baskets hard to find? I've found the calliper itself is the same one fitted to Aussie BA-BF Falcons with a different bracket so I was going to source the callipers and rotors here in Oz (they're available and close to US price) to save on freight costs.

Is the Mustangsteve kit a good one to use?

 

For rear brakes I was looking at the Vintage Venom Cobra kit. Any feedback on them would be good. I was looking at their front kit as well but my wheels are close to a stock 69 offset.

 

Cheers Shaun

 

I have the Vintage Venom GT500 front kit and fitment was great! i had to turn my new drum hubs due to them having extra casting but that was it. I did go with 70 forged spindles from Street or Track while i was changing out my factory 69 disc spindles. i have the Baer T4 kit from Gateway Classic Mustang.. was the most cost effective 13" rear kit i could find at the time. Both kits met my budget for 14" in the front and 13" in the back... that fit within 18" GT4 wheels.

[shaun071 62]

I had a look at those kits but they are a little out of my price range at the moment. It would be a nice upgrade in the future though.

[shaun071 62]

I had a look at those kits but they are a little out of my price range at the moment. It would be a nice upgrade in the future though.

[SM69Mach 68]

Contact Shaun at Street or Track, and he can help you out with what you need. I think he even has a reseller in country to you that may help on pricing and shipping.

 

http://www.streetortrack.com/Australian-Distributorship-p-10.html

[SM69Mach 68]

Contact Shaun at Street or Track, and he can help you out with what you need. I think he even has a reseller in country to you that may help on pricing and shipping.

 

http://www.streetortrack.com/Australian-Distributorship-p-10.html

[shaun071 62]

Thanks- I'll email the Aussie distributor. I like the look of their rear kit. It makes it easy if you don't have to remove the rear bearings.

[shaun071 62]

Thanks- I'll email the Aussie distributor. I like the look of their rear kit. It makes it easy if you don't have to remove the rear bearings.

[SM69Mach 68]

Yeah It was an easy install. I am using that for my rears and Shaun's Disk Spindle kit for the fronts.

[SM69Mach 68]

Yeah It was an easy install. I am using that for my rears and Shaun's Disk Spindle kit for the fronts.

[1969_Mach1 334]

Contact Shaun at Street or Track, and he can help you out with what you need. I think he even has a reseller in country to you that may help on pricing and shipping.

 

http://www.streetortrack.com/Australian-Distributorship-p-10.html

 

I read this post because I have considered rear disc brakes on my Mach 1. I've always wondered how connecting the emergency brake cable is done. Are there any other methods than what is shown on Street or Track's website? The method they show using hardware store cable clamps is kind of "sketchy".

[1969_Mach1 334]

Contact Shaun at Street or Track, and he can help you out with what you need. I think he even has a reseller in country to you that may help on pricing and shipping.

 

http://www.streetortrack.com/Australian-Distributorship-p-10.html

 

I read this post because I have considered rear disc brakes on my Mach 1. I've always wondered how connecting the emergency brake cable is done. Are there any other methods than what is shown on Street or Track's website? The method they show using hardware store cable clamps is kind of "sketchy".

[shaun071 62]

I'm not really keen on the e brake cable either. I was looking at using a shortened 90's aus falcon cable which looks like a similar e brake mechanism. Just cut to length and swage a new end fitting on.

[shaun071 62]

I'm not really keen on the e brake cable either. I was looking at using a shortened 90's aus falcon cable which looks like a similar e brake mechanism. Just cut to length and swage a new end fitting on.

[GT350 16]

mustang steve does the brackets and rear park brake cable to suit cobra conversion for early stangs http://www.mustangsteve.com/

[GT350 16]

mustang steve does the brackets and rear park brake cable to suit cobra conversion for early stangs http://www.mustangsteve.com/