rep1969 10 Report post Posted May 27, 2014 On the drivers side of my air cleaner there is a hole that the vent tube from the valve cover goes too. I have been looking and looking for the piece that goes in the air cleaner itself that the hose connects to. Can anyone tell me where I can find that piece and what it is actually called? Quote Share this post Link to post Share on other sites
miketyler 15 Report post Posted May 27, 2014 I believe it looks something like this: Quote Share this post Link to post Share on other sites
Restomod 10 Report post Posted May 27, 2014 Ok took a picture of mine but here is my disclaimer: I did not assemble my car so I dont know if this is 100% correct for whatever application they had differences in. That is, my car is 351C non shaker car originally, I dont know enough about the concours end yet on the 70 to tell you this is right for my car even so take it for what its worth as there seems to be about 3 different setups, one being like Mike shows. I have to assume this is the elbow I have but cant be for sure as it says it is the one for the oil cap itself. Maybe someone can verify all this, they could be the same elbow on each end? http://www.npdlink.com/store/products/mustang_elbow_valve_cover_and_oil_cap-105524-2849.html And the rubber grommet is maybe this one? http://www.npdlink.com/store/products/grommet_pcv_valve_and_angle_fitting_6767_1-105603-1.html Quote Share this post Link to post Share on other sites
