prayers1 153 Report post Posted May 4, 2014 I've replaced the entire front suspension and steering linkage, now I need to know how tight to make the nuts on the following pieces. Pitman arm to center link Outer tie rod end Inner tire rod end Idler arm to center link UCA to Shock tower LCA to undercarriage Spindle to Upper & Lower ball joints. Thanks for your time and help. Quote Share this post Link to post Share on other sites
Big Secz 26 Report post Posted May 4, 2014 I pulled these out of my '71 shop manual. Should be the same for '69/'70. Pitman Arm to Control Valve 35-47 Outer tie rod to spindle 35-47 Center Link to Idler Arm 50-70 Pitman Arm to Center Link 35-47 Inner tie rod to center link 35-47 Pitman Arm to Sector Shaft 150-225 Idler Arm Bracket to Frame 30-40 Tie rod connecting sleeve bolts 9-15 Ball joint to spindle 60-90 Lower control arm 60-90 Upper control arm 100-140 *Torque to the low limit of specs then tighten the nut to the nearest cotter pin slot. Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted May 4, 2014 Big Secz- I know it took some time getting this info. and I really appreciate it. Thanks again for your help!! Quote Share this post Link to post Share on other sites
Big Secz 26 Report post Posted May 4, 2014 No problem at all. I have a complete set of '71 shop manuals complete with the hard to find pocket service manuals. All of the torque specks were already in the pocket service manuals, so it saved me from having to search through all of the shop books. The pocket service manuals are great and include every service spec you can think of. Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted May 5, 2014 No problem at all. I have a complete set of '71 shop manuals complete with the hard to find pocket service manuals. All of the torque specks were already in the pocket service manuals, so it saved me from having to search through all of the shop books. The pocket service manuals are great and include every service spec you can think of. I've never heard or seen one of these. Can you take a picture? Quote Share this post Link to post Share on other sites
Big Secz 26 Report post Posted May 5, 2014 They are small reference manuals (approx. 4" x 7.5") the perfect size for mechanic to keep in their back pocket. Probably why they are so hard to find in complete or decent shape. The one on the left is a "Supplement" manual which covers every spec for all differentials, engines, and carbs for that year. The one on the right is twice as thick and covers distributors, additional carb specks, fuel (pumps, tanks, etc.), exhaust systems, starters AC systems, every torque spec for everything on the car, and just about everything else you can think of. All of the info in the books appear in chart form. Here are a couple of random scans for examples from each of the manuals. Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted July 17, 2014 Thanks for this info. My computer is down and I can't get to my electronic shop manual. Does anyone have the torque spec for the spring perches on the UCA? Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted July 17, 2014 The 69 Shop Manual; Spring Seat for Upper Arm 25-40 lbs. Pg. 3-13-05. Brian Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted July 17, 2014 Thanks Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted December 30, 2014 Computer died, trying to recover the codes so I can access the manuals on my tablet. Does anyone know the front shock torque specs top and bottom? Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted December 31, 2014 I've replaced the entire front suspension and steering linkage, now I need to know how tight to make the nuts on the following pieces. Pitman arm to center link Outer tie rod end Inner tire rod end Idler arm to center link UCA to Shock tower LCA to undercarriage Spindle to Upper & Lower ball joints. Thanks for your time and help. I'm glad to see you got your information. One of the best investments you can make for your car is a set of the Ford Shop Manuals. Not the repair manuals you buy in an Auto parts store but a repro of the originals. I have Factory Service Manuals for all my vehicles. They're full of useful information. You can accomplish a lot more with them. Quote Share this post Link to post Share on other sites
TexasEd 188 Report post Posted December 31, 2014 I wish mine were hard copy instead of electronic. I emailed the company today though and they got me set up with new downloads and my activation code in an hour. Now I just need to set up my tablet. Quote Share this post Link to post Share on other sites
potato 10 Report post Posted May 1, 2022 On 5/4/2014 at 10:51 AM, Big Secz said: I pulled these out of my '71 shop manual. Should be the same for '69/'70. Pitman Arm to Control Valve 35-47 Outer tie rod to spindle 35-47 Center Link to Idler Arm 50-70 Pitman Arm to Center Link 35-47 Inner tie rod to center link 35-47 Pitman Arm to Sector Shaft 150-225 Idler Arm Bracket to Frame 30-40 Tie rod connecting sleeve bolts 9-15 Ball joint to spindle 60-90 Lower control arm 60-90 Upper control arm 100-140 *Torque to the low limit of specs then tighten the nut to the nearest cotter pin slot. Another thank you for these. I have a bunch of ford 1969 manuals that show the exploded parts view of the front end, but I'm not seeing torque values. Does anybody happen to have the specs handy for these locations? I'm about to be redoing the front end or my car. Upper shock tower to export brace and shock mount. Upper front shock to the upper shock mount Upper control arm to shock absorber spring perch Bottom of front shock to spring perch Lower control arm where the strut bar attaches. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted May 1, 2022 I usually tighten them until they strip, then back them off a quarter turn. But seriously, I'd just snug them up good. If you really need to torque them, just look up the specs for that particular sized bolt. Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted May 1, 2022 Its not much, but from the Ford Shop Manual; 1 potato reacted to this Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted May 1, 2022 This is from the Concours site: Quote Share this post Link to post Share on other sites