sub frame suports what ones?

[Mr.CNC 10]

I am putting a order in today and was wondering what ones to get. I am looking at the global west round tube type. or the $100 square tube ones from NPD

[69NC 21]

I am putting a order in today and was wondering what ones to get. I am looking at the global west round tube type. or the $100 square tube ones from NPD

 

 

I used the Tin mans very happy with the fit. they follow the floor pan very well.

I ordered mine through Summit Racing.

 

They help a lot. as we all know Mustangs are not structurally stiff, and Convertibles are even less so.

 

Here is the write up on my install:

 

http://www.theracg.com/2012/07/lower-seat-pan-and-subframe-connectors/

 

[RPM 1,190]

I don't think there's a better looking SFC than Tinman.

 

Bob

[Mr.CNC 10]

looking at these ones http://mustangforums.com/forum/classic-mustangs-tech/578919-subframe-connectors.html

[jmandcb769 10]

Maier racing. Had Tcp and the fit was horrible....wouldn't weld it on my worst enemies car lol

[Rsanter 152]

First, what car do you have?

I like to make my own verses buying them

They are not that hard to make and they are not that complex

 

Also. If you have a coupe or fastback I like to put the conv inner rocker and torque boxes if you want to go the stealth route

 

Bob

[Mr.CNC 10]

I have spent a lot of time fabbing everything and I would like to buy a few parts that should be close to working. I want to run a set of under ride traction bars as well and am worried they might not work together. Thanks for the help so far guys.

[RPM 1,190]

Hey Mr.CNC, I've got a set of under rides I removed from my mach one that I'll let you have for a song and dance if you like. Let me know.

 

Bob

[PaleRider 12]

tins mans - used on 2 different cars - look like they are factory. nice fit

[Grabber70Mach 107]

Maier racing. Had Tcp and the fit was horrible....wouldn't weld it on my worst enemies car lol

 

Could you post a picture looking from the side?

[jmandcb769 10]

Could you post a picture looking from the side?

 

I'll get one tomorrow

[Unkleen 11]

Tin Mans here. Happy with the fit and quality of them.

 

[Grabber70Mach 107]

I'll get one tomorrow

 

Thanks

[jmandcb769 10]

Thanks

 

Here ya go. Went with the maier for extra support more then anything.. They attach a good foot past the frame rails instead of the first couple inches.

[BuckeyeDemon 211]

you could make your own.

 

 

[jmandcb769 10]

Bdemon..you definitely have the tighest looking Sfc I've seen. Wow!

[Mr.CNC 10]

I ended up getting global west SFC.

[takoarm 10]

I picked up the Global West SFC and will be installing them next week. I'll let you know.

[Grabber70Mach 107]

Here ya go. Went with the maier for extra support more then anything.. They attach a good foot past the frame rails instead of the first couple inches.

 

Thanks I appreciate it.