Mr.CNC 10 Report post Posted March 30, 2014 I am putting a order in today and was wondering what ones to get. I am looking at the global west round tube type. or the $100 square tube ones from NPD Quote Share this post Link to post Share on other sites
69NC 21 Report post Posted March 30, 2014 I am putting a order in today and was wondering what ones to get. I am looking at the global west round tube type. or the $100 square tube ones from NPD I used the Tin mans very happy with the fit. they follow the floor pan very well. I ordered mine through Summit Racing. They help a lot. as we all know Mustangs are not structurally stiff, and Convertibles are even less so. Here is the write up on my install: http://www.theracg.com/2012/07/lower-seat-pan-and-subframe-connectors/ Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted March 30, 2014 I don't think there's a better looking SFC than Tinman. Bob Quote Share this post Link to post Share on other sites
Mr.CNC 10 Report post Posted March 31, 2014 looking at these ones http://mustangforums.com/forum/classic-mustangs-tech/578919-subframe-connectors.html Quote Share this post Link to post Share on other sites
jmandcb769 10 Report post Posted March 31, 2014 Maier racing. Had Tcp and the fit was horrible....wouldn't weld it on my worst enemies car lol Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted March 31, 2014 First, what car do you have? I like to make my own verses buying them They are not that hard to make and they are not that complex Also. If you have a coupe or fastback I like to put the conv inner rocker and torque boxes if you want to go the stealth route Bob Quote Share this post Link to post Share on other sites
Mr.CNC 10 Report post Posted April 1, 2014 I have spent a lot of time fabbing everything and I would like to buy a few parts that should be close to working. I want to run a set of under ride traction bars as well and am worried they might not work together. Thanks for the help so far guys. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted April 1, 2014 Hey Mr.CNC, I've got a set of under rides I removed from my mach one that I'll let you have for a song and dance if you like. Let me know. Bob Quote Share this post Link to post Share on other sites
PaleRider 12 Report post Posted April 1, 2014 tins mans - used on 2 different cars - look like they are factory. nice fit Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted April 1, 2014 Maier racing. Had Tcp and the fit was horrible....wouldn't weld it on my worst enemies car lol Could you post a picture looking from the side? Quote Share this post Link to post Share on other sites
jmandcb769 10 Report post Posted April 2, 2014 Could you post a picture looking from the side? I'll get one tomorrow Quote Share this post Link to post Share on other sites
Unkleen 11 Report post Posted April 3, 2014 Tin Mans here. Happy with the fit and quality of them. Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted April 4, 2014 I'll get one tomorrow Thanks Quote Share this post Link to post Share on other sites
jmandcb769 10 Report post Posted April 4, 2014 Thanks Here ya go. Went with the maier for extra support more then anything.. They attach a good foot past the frame rails instead of the first couple inches. Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted April 4, 2014 you could make your own. Quote Share this post Link to post Share on other sites
jmandcb769 10 Report post Posted April 4, 2014 Bdemon..you definitely have the tighest looking Sfc I've seen. Wow! Quote Share this post Link to post Share on other sites
Mr.CNC 10 Report post Posted April 4, 2014 I ended up getting global west SFC. Quote Share this post Link to post Share on other sites
takoarm 10 Report post Posted April 4, 2014 I picked up the Global West SFC and will be installing them next week. I'll let you know. Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted April 5, 2014 Here ya go. Went with the maier for extra support more then anything.. They attach a good foot past the frame rails instead of the first couple inches. Thanks I appreciate it. Quote Share this post Link to post Share on other sites