Vinyl top molding NEEDED!!

[beecj0 11]

I really only need the one, but would be willing to buy the set if need be.

[9RO1M 12]

Pretty hard to find parts,not cheap when they do.They come up from time to time,took me ages to find a set.Here's one on ebay but looks like the small piece that returns around to the window is missing which isnt good becahttp://www.ebay.com/itm/Mustang-OEM-Vinyl-Top-Molding-fits-69-Left-Hand-/370882987912?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1969%7CModel%3AMustang&hash=item565a594788&vxp=mtruse then you need to find the small piece and good luck with that one.You can also try http://www2.cougarpartscatalog.com/ they do nos mustang parts aswell,probably not cheap either.Hopefully someone has a set on here at a reasonable price.Good luck with the project beecj0.

[beecj0 11]

Thanks.

I did see that one. its the wrong side.

I have all but the RH small piece that returns to the window. I have a couple lines out. We'll see what happens.

 

Thanks again

[jwscarab 20]

I have a set of LH and RH long ones - sounds like that doesn't help u tho.

[beecj0 11]

No.

But thanks for the bump!

[Mike65 475]

Check out the parts for sale section on VMF, that is where I got mine from.

[therebel 10]

I bought a parts car that had a vinyl top. Can you post a pic of the parts you are needing? Most of the trim was in the trunk so I'm not sure what the parts you need look like.

[beecj0 11]

This is the left side inner molding. I need the right side inner.[ATTACH]16475[/ATTACH]

[therebel 10]

I'll go dig through the parts pile but it will probably be this weekend before I get a chance. Is this on the inside or the outside of the car?

Edited March 6, 2014 by therebel

[beecj0 11]

This is the outside of the car, but it's the inner part of the c-pillar that goes from the window trim to the rear point of the c pillar.

Thanks for you time!

Joe

[beecj0 11]

Bump

[therebel 10]

I have the trim pieces that go around the rear window. Is that what you need. I have a lot of other trim pieces too but they don't look like the picture.

[Trinitys 134]

i might have a set of smaller trim.....i'll dig and look this weekend too

[beecj0 11]

Trinitys

Thanks for your effort in advanced.

Love you coupe. What is your wheel/tire size and back spacing. I'm staying old school till it back on the road for a while. Then who knows!

Edited March 12, 2014 by beecj0

[beecj0 11]

Bump

[jwscarab 20]

beecj0! Its your lucky day - but HURRY. I just saw this (not mine).

 

http://www.ebay.com/itm/1969-1970-Ford-Mustang-Vinyl-Top-Body-Trim-Moulding-4-Piece-Set-OEM-/131145453630?pt=Vintage_Car_Truck_Parts_Accessories&fits=Year%3A1969%7CModel%3AMustang&hash=item1e88e0d03e&vxp=mtr

[beecj0 11]

beecj0! Its your lucky day - but HURRY. I just saw this (not mine).

 

http://www.ebay.com/itm/1969-1970-Ford-Mustang-Vinyl-Top-Body-Trim-Moulding-4-Piece-Set-OEM-/131145453630?pt=Vintage_Car_Truck_Parts_Accessories&fits=Year%3A1969%7CModel%3AMustang&hash=item1e88e0d03e&vxp=mtr

 

The 69 and 70 body lines are slightly different. Is the trim the same?

I just got back to work. I work on the north slope.im about 800 mes from home now.

Can anybody say for sure that these are the same?

Thanks for the heads up!

Joe

[beecj0 11]

I bought the moldings on ebay! I only need the one piece. I'll hold on to the others till some one messages me that they need them. Thanks for all the help!:punk: