Ash 145 Report post Posted November 12, 2017 That all looks very neat and balanced. The symmetry of the layout looks great. Nice work! 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 13, 2017 23 hours ago, Ash said: That all looks very neat and balanced. The symmetry of the layout looks great. Nice work! Thanks! Much appreciated. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 25, 2017 Ok, been taking care of ticky tack stuff. Now back to the fab stuff. Intercooler mounted and plumbed. Fabed up a steel lower air dam, it sits a little low, so some adjustment there. Maybe a hinge so I can raise it when needed? Almost finished with the front end, but I do not want to put a bumper on the front. Any ideas? Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted November 25, 2017 tough looking car, 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 25, 2017 Hood is within 1/4" of fitting. Yay!!!! Quote Share this post Link to post Share on other sites
MAC390 327 Report post Posted November 25, 2017 Great work, is there ducting for under hood exhaust temp? 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 25, 2017 2 minutes ago, MAC390 said: Great work, is there ducting for under hood exhaust temp? Not yet, but there will be. The sides of the front air dam will have scoops for flowing air over the turbos, and out vents in the hood. 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 26, 2017 Think I will do a bumper tuck. Quote Share this post Link to post Share on other sites
Silver_69_Coupe 31 Report post Posted November 26, 2017 Ring Brothers does an interesting front bumper. Ring Brothers Bumper. 1 Johns Summer of 69 reacted to this Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 26, 2017 3 hours ago, Silver_69_Coupe said: Ring Brothers does an interesting front bumper. Ring Brothers Bumper. Thanks, very nice. I might try to work some of those elements in. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 26, 2017 Removed about 2 inches to raise them up, and rotated them to be in line with lower fascia. Quote Share this post Link to post Share on other sites
stangnet33 88 Report post Posted November 27, 2017 Did you give a slitter look a thought ? Great fab work ! 1 Footcutter11 reacted to this Quote Share this post Link to post Share on other sites
unilec 57 Report post Posted November 27, 2017 Awesome, would look good in a Mad MAX movie. How about some metal fab work and join the lower valance and the top stone guard together so it looks like one panel, then fab up a grill to fit in the opening. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 29, 2017 On 11/27/2017 at 2:35 AM, unilec said: Awesome, would look good in a Mad MAX movie. How about some metal fab work and join the lower valance and the top stone guard together so it looks like one panel, then fab up a grill to fit in the opening. Thanks. I am currently adding vents to the side of the air dams for cold air inlets to cool the hot side of the turbos. I like what Silver 69 put up, so I am going to do a bumper tuck. Stay tuned! :) Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 29, 2017 On 11/26/2017 at 10:02 PM, stangnet33 said: Did you give a slitter look a thought ? Great fab work ! Thanks! What is that? Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted November 29, 2017 On 11/26/2017 at 9:02 PM, stangnet33 said: Did you give a slitter look a thought ? Great fab work ! Probably should have a P in there for splitter. Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. Splitteris typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper. Quote Share this post Link to post Share on other sites
Footcutter11 23 Report post Posted November 29, 2017 1 minute ago, RPM said: Probably should have a P in there for splitter. Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. Splitteris typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper. Thought I was missing something. I am trying to keep the original flavor with twists. I front spoiler was molded around an original mach 1 chin spoiler. Quote Share this post Link to post Share on other sites
stangnet33 88 Report post Posted November 29, 2017 Sorry about that and thx Bob. So yes something like this (incase you didn't see the build) http://s628.photobucket.com/user/Tyler_Pfister/media/1969 Restoration Project/541_zpslycw9q2p.jpg.html Quote Share this post Link to post Share on other sites
RogerC 136 Report post Posted March 24, 2018 Saw this on ebay. You're selling? How come? Quote Share this post Link to post Share on other sites