Jump to content
Sign in to follow this  
Ry-speeed

1969 Grande coupe parts, AC parts and +++

Recommended Posts

First off, you guys in Southern Statesare gonna find these prices a little steep, but any vintage mustang parts are scarce up here in Eastern Canada.

 

Hubcaps (Grande, OEM spoked/wirewheel hub caps, great shape!) 100$

 

Steering wheel 2 spoke w/ insert pad (standard interior, black, 2 cracks but repairable) 30$

 

Taillights (w/ or w/out chrome bezel) $100/set

 

Window glass (Carlisle w/ OEM tint)

Windshield 300$

Back glass 200$

Door Glass 175$

1/4 window glass 100$

 

Headlight buckets (driver side only, missing lower tab) 80$

 

Gas cap (w/ cable, lense cracked but chrome good) 25$

 

Trim exterior (All OEM ford, no re-pops)

-Wheelwell mouldings original, very good shape $250/4

-Vinyl top 100$

-Trunk lip (Grande) 75$

-Rear window (4) 150$/4

-Door weather stripping chanel (2) 100$/2

-Windshield (4) 200$

-Drip rail (for Vinyl top, pass side has scuffs, driver good) 150$/2

 

Trim interior (Black, radio sides, dash sides, kick panels- 15$ each

 

Emergency brake pedal assembly 50$

 

Brake pedal+bracket Power disc/auto trans 75$

 

Faux rear brake duct (scallops) w/ good chrome 40$ each

 

Bumpers front and rear OEM (driver quality but straight) 100$ each

 

Steel rims 14" 5 bolt Ford OEM 80$/set

 

Water pump FoMoCo C80E-D brand new 40$

 

Carb 2 bbl 302 autolite OEM (condition unknown, comes with rebuild kit) 20$

 

Intake 302 2bbl cast 20$

 

Exhaust Manifold Ford 302 OEM 40$/both

 

Radiator ("W-mo" copper 24" w/ both rad hose connections on passenger side, needs good flush but complete 75$

 

Air cleaner OEM (no snorkel or heater tube) 50$

 

Strut Brace (1 piece OEM or 2 piece OEM) 30$

 

Sway bar front OEM small block 20$

 

Trunk lock with key 50$

 

Many other misc hardware, steering column pieces, door handles, switches, hood/trunk latch w/ key, ECT..

 

SOLD ITEMS (not availible)

Hood, torque boxes, differential, cluster, spindles, trunk lid, seats, radio, 1/4 extensions, door panels, 1/4 int panels, doors, fenders, rocker panel trim, hood lip trim, AC system

 

Located in Montreal, Quebec, Canada. (~1 hour from Plattsburg NY)

 

Phone (514) 602-8799

 

ryanasprey@gmail.com for pictures.

 

Thanks!

Edited by Ry-speeed

Share this post


Link to post
Share on other sites

Are the rocker panel moldings in good shape? Do you have the bottom steering column cover? It mounts under the dash with a screw on each side of the column through a tab on each side. Should be 2 metal clips visible when you remove it. Also looking for the 2 plastic pieces for the driver and passenger side that go along the inside of the windshield. Mine have broken tabs at the top.

Edited by rangerdoc

Share this post


Link to post
Share on other sites
Are the rocker panel moldings in good shape? Do you have the bottom steering column cover? It mounts under the dash with a screw on each side of the column through a tab on each side. Should be 2 metal clips visible when you remove it. Also looking for the 2 plastic pieces for the driver and passenger side that go along the inside of the windshield. Mine have broken tabs at the top.

 

Rocker panel moldings are in good shape, leave your email and I'll snap some pics of them for you.

 

Under steering column cover had both lower tabs broken.

 

Of the interior window side trim 1 side is good, the other in 2 pieces.

Share this post


Link to post
Share on other sites
I'm sorry Mike I don't know what exact dimension your looking for.

 

Grill side trim? flat trim under grill?

GM3TR.jpgGM3CW.jpgGM3CT.jpg

 

The thin moldings that are on the head light buckets l/s & r/s, & the wide & thin molding in front of the grille are the ones I am looking for. (see attached pics).

Share this post


Link to post
Share on other sites

May I get pictures of the "Door panels black, standard with upper trim and arm rest"

 

Also would like to know the part number on the radiator and pictures.

 

Also looking for a standard console plate black for a 69 automatic if available.

 

Send to jcb1@optonline.net

 

Thank you John.

Edited by JCB-69CJ

Share this post


Link to post
Share on other sites
May I get pictures of the "Door panels black, standard with upper trim and arm rest"

 

Also would like to know the part number on the radiator and pictures.

 

Also looking for a standard console plate black for a 69 automatic if available.

 

Send to jcb1@optonline.net

 

Thank you John.

 

Sorry John, the door panels sold this past weekend.

 

I do not have any console pieces for sale currently.

 

I will check on part #'s for the rad and report back shortly.

Share this post


Link to post
Share on other sites

Update

 

Driver side Dynacorn torque box sold

Pass side headlight bucket sold

Door panels and 1/4 int side panels sold

Instrument cluster sold

Horns sold

 

Pending - trunk lid, 1/4 panel extensions, grille side trims, grille lower trims wide and narrow.

Share this post


Link to post
Share on other sites
I'm looking for the a/c heater face plate. Not sure if the faceplate seperates or its made together. I have the controller, I just need the face plate.

 

Sorry John, I'm trying to sell my AC set-up as a whole so someone can throw it into a non-AC car.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...