oil blown out of dipstick??

[rawlinss 14]

Anyone ever had oil blow dipstick up and blow oil out?? This happened on the way home today...

[Wycked69 20]

Check your PCV valve (Postive Crankcase Ventilation). Could simply be its not venting your crankcase and there is no place for the pressure to go.

[BlueB302 10]

Do a compression test. Wet and dry test. Probably find a bad one.

[1969vert 55]

You can do a leak down test also..unless the pcv aint working usually oil chunkers are close to being done...you can also put a thin piece of paper over the breather on the oposite side of the valvecover..it should stick with the engine running..if its puffing and breathing you might have a bad hole or 2...

Edited July 8, 2013 by 1969vert

[rawlinss 14]

Motor is freshly rebuilt. Will be replacing PCV valve this week. Have a cheap one on there now and since they don't cost much anyway seems like the best place to start.

 

Came from a car show too that I won Best Ford. Some Haters may have pulled the dip stick out. 1st time we have had anything like this happen. Has been running like a charm....

[1969vert 55]

So it might not of blown out..thats good...