What problems do you see coming?

[carnutt71 10]

I'am putting a 347 with holley systemax fuel injection, 60 mm turbo and tko 5 speed in my 69 fastback. I have read as much about this as I can find but I know there is something I have missed. I was hoping someone might know of a a problem before I get to far. This has been a real learning experience.

[carnutt71 10]

I used Mcleod hydraulic throw out bearing and their RST dual disc clutch.I have a 3.50 locker (not yet installed waiting on a good set of axles) for it. Msd ignition and AEM boost control.

[steves69coupe 10]

have you had the hood on it yet? the radiator looks like its a lil high there.

[carnutt71 10]

I have not put hood on yet. It measures the same but the coners are square instead of round. I hope the hood works. There is port on top of intake I'am worried about also

[turboclevor 10]

how are you going to run the intercooler plumbing? i am wondering because i plan on twin turboing my '69

[carnutt71 10]

The spot under where the battery was is rusted out so we are going to cut it out to allow clearance to make the turn. The air cleaner will be in the PS fender to make a little more room. The stock shock towers are sure going to make it tight.

[turboclevor 10]

Cool! be sure to post pics!

[carnutt71 10]

Will do plan on starting headers first of next week.Hope it all fits.The sway bar may have to go.

[stangme428 33]

carnutt71 - i do have a question... are you placing a different dash opening or are the fuses shown in the dash pic not behind the dash pad? just curious..

[carnutt71 10]

The fuses in the pic are part of the Ron Francis wiring kit for the engine. The dash pad was in very rough shape so I removed it to make it easier to mount the computer and relays. I have a new pad to put back on when all of the engine tuning is done.