Ky69Mach 10 Report post Posted January 24, 2013 I am new to the forum so I figured I should tell a little about myself and my car since you guys have been so helpful in answering my questions. I purchased my 69 Mach 1 24 years ago at the ripe ol age of 14. I mowed yards to buy it. I am the third owner of the car. It was sold new in the county next to mine in 1969. The car has never left the state of Kentucky. I now have three sons of my own and figured it was time to finish what I started so long ago. I am ready for the motor and transmission to go in. It is all painted inside, outside, and underneath. Just a matter of bolting parts on now. I am putting a 427 Windsor with a TKO 600 behind it and running 373 pos in the rear. She is Triple black and clean. I am ready for this to be finished. Again, thanks for the help on this forum. :thumbup: Quote Share this post Link to post Share on other sites
69droptopgt 10 Report post Posted January 24, 2013 Welcome Here. Look forward to the pictures. Paulo Quote Share this post Link to post Share on other sites
69R-CODE 25 Report post Posted January 24, 2013 What part of Kentucky are you from? Good to see another 69 in the state! Quote Share this post Link to post Share on other sites
Ky69Mach 10 Report post Posted January 24, 2013 I live in Glasgow. We are about 30 miles due east of Bowling Green, one hour north of Nashville, TN on 31E Quote Share this post Link to post Share on other sites
stangme428 33 Report post Posted January 24, 2013 great! cant wait to see the project!:clap: Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted January 24, 2013 I am new to the forum so I figured I should tell a little about myself and my car since you guys have been so helpful in answering my questions. I purchased my 69 Mach 1 24 years ago at the ripe ol age of 14. I mowed yards to buy it. I am the third owner of the car. It was sold new in the county next to mine in 1969. The car has never left the state of Kentucky. I now have three sons of my own and figured it was time to finish what I started so long ago. I am ready for the motor and transmission to go in. It is all painted inside, outside, and underneath. Just a matter of bolting parts on now. I am putting a 427 Windsor with a TKO 600 behind it and running 373 pos in the rear. She is Triple black and clean. I am ready for this to be finished. Again, thanks for the help on this forum. :thumbup: Welcome to the forums & great story! Almost the same as mine, but my dad restored it in the late 80s and then I got it when I was 16. I went with a 392w myself, and I'm definitely saving up for a tko lol also, post pics! :D Quote Share this post Link to post Share on other sites
69R-CODE 25 Report post Posted January 24, 2013 I am in Owensboro. Glad to have you on board. Quote Share this post Link to post Share on other sites
prayers1 153 Report post Posted January 24, 2013 Welcome! Looking forward to your pictures. My Grandfather is from Cobb Hill, Estill County, Ky. Quote Share this post Link to post Share on other sites
Ky69Mach 10 Report post Posted January 24, 2013 Current progress is going good. I'm trying to learn to post photos Quote Share this post Link to post Share on other sites
Ky69Mach 10 Report post Posted January 24, 2013 Oh well, here is a link to a flikr account. Maybe this will work Quote Share this post Link to post Share on other sites
stangme428 33 Report post Posted January 24, 2013 Oh well, here is a link to a flikr account. Maybe this will work nice and clean... looking good!! Quote Share this post Link to post Share on other sites
Ky69Mach 10 Report post Posted January 24, 2013 Thanks, a couple to three hours per night go a long way. Quote Share this post Link to post Share on other sites
fvike 173 Report post Posted January 24, 2013 Lookin' good! :D Quote Share this post Link to post Share on other sites
Ky69Mach 10 Report post Posted February 1, 2013 (edited) She is back on the ground and unwrapped. Brake lines installed, clutch master cylinder installed, POR15 inside and under with a a layer of satin enamel underneath. My motor is being balanced right now. I am getting ready to order my TKO. The anxiety is setting in, it's been too long http://www.flickr.com/photos/ky69stang/ Edited February 1, 2013 by Ky69Mach Quote Share this post Link to post Share on other sites
EastYorkStang 63 Report post Posted February 1, 2013 Welcome! Just waiting for some warm weather myself so I can do some work on mine. Quote Share this post Link to post Share on other sites
Ky69Mach 10 Report post Posted February 12, 2013 Dynamat is in, brake master cylinder and lines are in working, hydraulic clutch master cylinder in, all pedals restored and installed with roller bearings. Ready to install my dash. Just two weeks out on a fresh 427 Windsor. I can hardly wait. I hope I can turn the key around my birthday on the ides of March! http://www.flickr.com/photos/ky69stang/ Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 12, 2013 Welcome!Just waiting for some warm weather myself so I can do some work on mine. +1 on waiting for the warmer weather so I can get back to work on mine too. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 13, 2013 +1 on waiting for the warmer weather so I can get back to work on mine too. I don't know how you guys live in that weather. Walked 18 holes of golf in 65 sunny degrees in California today. The politics and taxes here on the other hand... Bob Quote Share this post Link to post Share on other sites