kevin31 21 Report post Posted November 10, 2012 (edited) Hi, I am looking for a fender extension for my GT, driver side. Mine is cracked, and it is not possible to weld it. Thanks ;) Edited November 10, 2012 by kevin31 Quote Share this post Link to post Share on other sites
jeepcj7304 10 Report post Posted November 11, 2012 front or rear Quote Share this post Link to post Share on other sites
kevin31 21 Report post Posted November 11, 2012 Forgot to precise. Need a front one Quote Share this post Link to post Share on other sites
69mi 10 Report post Posted November 11, 2012 Hi, I am looking for a fender extension for my GT, driver side. Mine is cracked, and it is not possible to weld it. Thanks ;) kevin, i had a rear fender ext that was pretty effed up, cracked and a couple of holes punched thru. i found a guy who welded it up for me. i think he had a tig welder with some type of special high content aluminum rods. you might ask around. i didnt think you could weld pot metal either...but he did a nice job. Quote Share this post Link to post Share on other sites
jwscarab 20 Report post Posted November 13, 2012 Kevin - I have one on fleabay right now - do a search uncer my userid JWScarab Its is not bad but not perfect - read the ad and check out the pics well. If you want it, I will pull it off and sell it for $90 plus shipping. Quote Share this post Link to post Share on other sites
1957pistol 11 Report post Posted November 22, 2012 depending on the size of the crack and where, JB weld fixes pot metal the best. It takes time (use the real stuff and not the 5hr putty) and multiple layers, but I had the entire front lip missing and I rebuilt it with JB. when it hardens it is technically stronger than the pot metal its on. 1 JayEstes reacted to this Quote Share this post Link to post Share on other sites
