Mike65 475 Report post Posted December 19, 2012 i have 4 original like yours with the GT center caps... 3 beauty rings... dunno what happened to the 4th... ran them on my 69 for 5 years... I only have 2 of the trim rings, I am missing the other two. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted December 25, 2012 Over this past weekend I finished removing the pedal hanger from my Coupe so I can get a clutch pedal to add to it for the planned T-5 conversion. I also need to clean it up & paint it. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted December 31, 2012 For Christmas I got a welder cart, now my welder, helmut, & gloves have a home & I know right where they are when I need them. I got a Mach-1 front spoiler for my Birthday which will go on once I finish repairing the front valance. Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted December 31, 2012 nice cart. that will make things easy. you are posting a lot of good pictures. in the future consider making your pics 2-3 times bigger if nobody else has said the opposite (or is something screwed up with my computer?). they are difficult to see with my eyes. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted January 1, 2013 Well, my eyes they no look so good either. But I can see his pics just fine. Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted January 1, 2013 For Christmas I got a welder cart, now my welder, helmut, & gloves have a home & I know right where they are when I need them. I got a Mach-1 front spoiler for my Birthday which will go on once I finish repairing the front valance. is the picture below larger on your screen compared to your pic in the quote? do you just paste the image code from photobucket into your post? when i quote your post, the image code has some unique characters that almost appears to be resizing. sorry for writing this in your thread. i'm just trying to understand if my thread does look the same for others as it is for me. Quote Share this post Link to post Share on other sites
Ash 145 Report post Posted January 1, 2013 I got the small image first, now the large image with your post, Buckeye. Can't recall your thread having small images. Quote Share this post Link to post Share on other sites
1957pistol 11 Report post Posted January 1, 2013 Did you see the parts list I left for you on the IFS question? If you were only a little closer I could show you how I did mine. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 14, 2013 The pic of the pedal hanger on the right is after I sanded off all the surface rust & coated it with Mastercoat silver rust preventive paint & the pic on the right after spraying with Rustoleum satin black. Now it is ready for the clutch pedal & the power brake pedal. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 17, 2013 Removed the lower metal dash & stripped everything off it to sand blast it this weekend. Quote Share this post Link to post Share on other sites
69convertible 10 Report post Posted January 17, 2013 Nice work , your car is looking good , I like the fact that your going through the hole car restoring all the parts ,not just the bits you see ! Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 22, 2013 Well here is the dash after I tried to sand blast it. I will have to wait to try the paint stripper since it wil be only in the low 20's for the next few days. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted January 30, 2013 It was in the low 50's today so after work I continued reconditioning the interior hard parts. Under dash lights, dash end caps, lower steering column cover & windshield post moulding. Mike. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 13, 2013 Cleaned & repainted the outside of the housings with Dupli Color Metalcast, & sprayed the inside with chrome paint. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 13, 2013 Looking good Mike. Bob Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 16, 2013 After finishing restoring the tail light assembleys I laid them in place along with the pop open gas cap I had purchased to see what it will look like. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted February 21, 2013 Before & after stripping off the old paint from the seat tracks. Now I just need some warmer weather so I can repaint them & reinstall them on the seat. Mike. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 4, 2013 I was busy this past weekend I removed the old weatherstripping from the door interior upper trim panels cleaned & repainted them, removed the old paint from the drivers seat tracks, repainted them & then reinstalled them back on the seat, & painted the glove box door & hinge. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 12, 2013 The past couple days were in the low 50's so I got some more time to work on the interior parts. This time it is the dash. All painted & ready to reassemble. Quote Share this post Link to post Share on other sites
jnet4jt 10 Report post Posted March 12, 2013 Progress!! Keep the updates coming. Reading the post and looking at all the pictures everyone posts helps me pass the time over here in the sand box at the end of the day. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 14, 2013 Spent a little time yesterday reassembling the dash. Now I just need a radio. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 17, 2013 Over the weekend I spent several hours cleaning the wiper motor & the motor bracket, then I painted the wiper motor case & the bracket satin black. I put a small piece of tape over the build date stamp on the bottom on the wiper motor case that read Oct 28, 1968 & the part # stamp 12V C9ZF17504C. Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 21, 2013 My next winter project (even though it is now spring) was to clean & re-paint the e-brake assembley, so today I removed it from the car & started cleaning it. I went through the last of my parts boxs & found the release handle & it has broken off of the "L" shaped piece with the slot in it that is laying on the workbench between the handle & the assembley. :( Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted March 25, 2013 Well I finished cleaning up the e-brake assembley & painted it. Now I just have to weld the bracket bake on the handle & install it back on the assembley. Quote Share this post Link to post Share on other sites
stangme428 33 Report post Posted March 25, 2013 nice very nice work..... Quote Share this post Link to post Share on other sites