236/60/15 on front of 69 Mach 1

[Swags63 13]

I was wondering if anyone has run a set of 235/60/15 on the front of there mustang. I have a 69 428 car and I was wondering if this size tire will fit without any issues. I know there are some tire fitment guides out there but I was looking for some real world answers, though any help with the matter would be appreciated. These are going to be mounted on a 15X7 Magnum 500 wheel.

 

Thanks Swags63

 

:taz::helpsmilie::taz::helpsmilie:

Edited May 11, 2011 by Swags63

[70Mach03 12]

My 1970 Mach has 235/60/15's all the way around. I don't have any rub problems and I've got the stock front springs with one coil cut off for a little drop too.

[Burn 14]

I'm running 235's on the front with one inch drop springs and no issues. Wheels are original 15x7 4"bs. Mags.

[ashleesmach1 28]

so does my car , so put them on

[buening 63]

245/45/17 on my car and they fit no problem, so you should not have any issues with a narrower tire

[SM69Mach 68]

245/45/17 on my car and they fit no problem, so you should not have any issues with a narrower tire

 

 

Same here !!!

[SM69Mach 68]

245/45/17 on my car and they fit no problem, so you should not have any issues with a narrower tire

 

 

Same here !!!

[428 Cobra Jet 10]

Guy's,

 

I have a 70 fastback running a 427, 4 speed, with 215 x65x 15 Radial T/A on 15x7 prolites with 1"shelby drop, and 275 x 60 x 15 Comp t/A on 15 x 8 Prolites with standard 9" housing. The rear inside tyre rubs slightly, only with passengers onboard, fronts are fine, 235's do rub and steering is a lot harder with no P/S.

[428 Cobra Jet 10]

Guy's,

 

I have a 70 fastback running a 427, 4 speed, with 215 x65x 15 Radial T/A on 15x7 prolites with 1"shelby drop, and 275 x 60 x 15 Comp t/A on 15 x 8 Prolites with standard 9" housing. The rear inside tyre rubs slightly, only with passengers onboard, fronts are fine, 235's do rub and steering is a lot harder with no P/S.