kazlaszlo 10 Report post Posted March 15, 2011 I am looking for original rear swaybar, 1/2" ?? Kaz kazlaszlo@yahoo.com Quote Share this post Link to post Share on other sites
kazlaszlo 10 Report post Posted March 15, 2011 I am looking for original rear swaybar, 1/2" ?? Kaz kazlaszlo@yahoo.com Quote Share this post Link to post Share on other sites
Fordrevhead 29 Report post Posted March 15, 2011 In 69 only Boss 429 had rear sway bars; 3/4". In 70 Mach 1's also had sway bars; 1/2". 70 Boss 302's 5/8" and 70 Boss 429's 3/4". Otherwise not an option. That being said there's a myriad of aftermarket options. Quote Share this post Link to post Share on other sites
Fordrevhead 29 Report post Posted March 15, 2011 In 69 only Boss 429 had rear sway bars; 3/4". In 70 Mach 1's also had sway bars; 1/2". 70 Boss 302's 5/8" and 70 Boss 429's 3/4". Otherwise not an option. That being said there's a myriad of aftermarket options. Quote Share this post Link to post Share on other sites
kazlaszlo 10 Report post Posted March 16, 2011 In 69 only Boss 429 had rear sway bars; 3/4". In 70 Mach 1's also had sway bars; 1/2". 70 Boss 302's 5/8" and 70 Boss 429's 3/4". Otherwise not an option. That being said there's a myriad of aftermarket options. Thanks for the info. I have a '69 Mach I with 428 CJ. I have the plates installed, would like to find the 1/2 bar. Do the aftermarket bars fit the factory mounting brackets?? Kaz Quote Share this post Link to post Share on other sites
kazlaszlo 10 Report post Posted March 16, 2011 In 69 only Boss 429 had rear sway bars; 3/4". In 70 Mach 1's also had sway bars; 1/2". 70 Boss 302's 5/8" and 70 Boss 429's 3/4". Otherwise not an option. That being said there's a myriad of aftermarket options. Thanks for the info. I have a '69 Mach I with 428 CJ. I have the plates installed, would like to find the 1/2 bar. Do the aftermarket bars fit the factory mounting brackets?? Kaz Quote Share this post Link to post Share on other sites
Fordrevhead 29 Report post Posted March 17, 2011 Thanks for the info. I have a '69 Mach I with 428 CJ. I have the plates installed, would like to find the 1/2 bar. Do the aftermarket bars fit the factory mounting brackets?? Kaz 70 CJ's stepped up to the 5/8" Boss rear bar I think. So you have 70 brackets? I have not seen an aftermarket bar that uses those shock mount plate brackets. Most hook to the frame rails then the dif. With that in might you might be able to find one though with good pictures. good luck Quote Share this post Link to post Share on other sites