Trinitys 134 Report post Posted March 27, 2014 (edited) http://www.amazon.com/Gauge-Ratio-DISPLAY-Narrowband-Sensor/dp/B007JINOBI you....could try something like this to get yourself dialed in.......just a though. Same for me too....I could care less if I get pulled over. The rule was that I needed to be driving to get work done on it. I want to see them prove I was coming from a buddies house to get something done. Good luck with that. I'm looking at your restrictions and it looks pretty tight. sucks 1968 is the cut off! Texas restriction.....I just noticed that they list a 25 year exemption. 1. New vehicles for the newest two (2) model years 2. Vehicles with antique registration and plates 3. Vehicles 25 years old or older Keep an eye on this site for emissions laws. http://www.semasan.com/page.asp?content=emissions&g=semaga Edited March 27, 2014 by Trinitys Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted March 27, 2014 I went back today. Took a couple tries but I passed!!! Antique tags so I won't have to worry about that again as long as I live in DE. Now I'm looking for a set of 3.55 posi for 9" 28 spline Quote Share this post Link to post Share on other sites
Trinitys 134 Report post Posted March 28, 2014 http://www.semasan.com/page.asp?content=aa_2014DE2&g=SEMAGA Check this out for Delaware! Quote Share this post Link to post Share on other sites
Trinitys 134 Report post Posted March 28, 2014 Bad ass! Congrats! Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted March 28, 2014 http://www.semasan.com/page.asp?content=aa_2014DE2&g=SEMAGA Check this out for Delaware! So I wonder about antique tags. They make you exempt after tagged. Maybe I'm missing something but the page is talking about reconstructed vehicles so that shouldn't be a problem unless I'm reading it wrong Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted April 17, 2014 Swapping out the 8" rear and putting in a 9" with 3.70 posi. I am transferring all the brake hardware and lines to the 9" before I put it in Quote Share this post Link to post Share on other sites
takoarm 10 Report post Posted April 17, 2014 Car looks sick I'm doing a 69 loosely based Shelby Coupe as well. Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted April 18, 2014 Car looks sick I'm doing a 69 loosely based Shelby Coupe as well. Thank you!! :001_smile: Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted April 24, 2014 Got the brakes all swapped over to the 9" rear. Also got it bolted up. Just need to bolt in the gears and axles. Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted June 5, 2014 (edited) Got my wheels and tires. 17 x 9 1/2 in rear with 315/35 drag radials and 17 x 8 in front with 245/45. I will post up more pics on the car soon Edited June 5, 2014 by 69shelbycoupe Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted June 5, 2014 I will get better pictures outside later. They fit inside the wheels wells nicely. I hate tires that stick out of the rear quarter or fender but these fit just right. I think I need to lower it just a bit more Quote Share this post Link to post Share on other sites
stangme428 33 Report post Posted June 7, 2014 looking great!!! Quote Share this post Link to post Share on other sites
mustang1969 0 Report post Posted June 8, 2014 what rims are those? Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted June 8, 2014 what rims are those? Not 100% sure but they look like Coys to me. Quote Share this post Link to post Share on other sites
mustang1969 0 Report post Posted June 8, 2014 sorry but whats coys? Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted June 9, 2014 (edited) A wheel manufacturer, google Coys wheels. Also google MB wheels they look like them more. Edited June 9, 2014 by Grabber70Mach Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted June 9, 2014 Look like there Old School wheels. Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted June 9, 2014 Coy does not make the wheel that looks like this anymore. These are mb old school wheels. 17x9.5 in rear with 315/35 and front are 17x8 with 245/45 Quote Share this post Link to post Share on other sites
69shelbycoupe 11 Report post Posted June 12, 2014 Well for whatever reason it won't let me attach images now. When I select the image and then hit upload the page just goes white. I guess whenever the moderators get it fixed I will upload more. Quote Share this post Link to post Share on other sites
Drewsbrew 10 Report post Posted June 17, 2014 Could you provide the backspacing for the front and rear wheels. I have a similar ride and I would like to know how much BS I need to stuff that much rubber in the wheel wells. I'm thinking of doing a Ride-Tech coil over front and rear and I need to know they will tuck inside before I spend thousands on suspension and custom wheels/tires Thank you Ps. Very inspiring ride and well documented build. Quote Share this post Link to post Share on other sites
rodbrady 18 Report post Posted September 20, 2014 69shelbycoupe, did you ever Plasti Dip your car? I'm interested in seeing how it turned out. Quote Share this post Link to post Share on other sites
Endeavour32 10 Report post Posted February 20, 2017 Did you ever get this project finished? I want to do the Shelby mod to my '69 coupe and I'm curious how yours turned out. If so would you post some pictures of it? Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 21, 2017 Is pushing three years since he last posted. Quote Share this post Link to post Share on other sites
