427w stroker which Transmission ??

[moreHP 10]

Hi

Torq 550 + ft-lbs / 530 + hp and +100 nos, for this engine.

as daily and weekend drag, c4 or c6 should I use???

TCI 's super street fight right??

Do you have any other suggestions or you?

Thanks.

[moreHP 10]

Hi

Torq 550 + ft-lbs / 530 + hp and +100 nos, for this engine.

as daily and weekend drag, c4 or c6 should I use???

TCI 's super street fight right??

Do you have any other suggestions or you?

Thanks.

[RPM 1,190]

Guys run C4's behind stroked 460's all the time. Save some weight also.

[RPM 1,190]

Guys run C4's behind stroked 460's all the time. Save some weight also.

[Black_69_FB 49]

If you have the money, I would think about a built AOD. Assuming it will see a fair amount of highway time.

[Black_69_FB 49]

If you have the money, I would think about a built AOD. Assuming it will see a fair amount of highway time.

[MikeStang 247]

The C6 will suck the power up, but a dern near stock C6 will handle that kind of power, where as you will have to spend some cheeze to make a C4 hold that power.

Mike

[MikeStang 247]

The C6 will suck the power up, but a dern near stock C6 will handle that kind of power, where as you will have to spend some cheeze to make a C4 hold that power.

Mike

[moreHP 10]

yes c4 weight loss rate and good. high torque, but also in daily use, may be short-lived doubt in my mind.

Money is the problem, I am a student

Do you think this happens?

http://www.summitracing.com/parts/TCI-511205/

[url=http://www.summitracing.com/parts/TCI-511205/][/url]

[moreHP 10]

yes c4 weight loss rate and good. high torque, but also in daily use, may be short-lived doubt in my mind.

Money is the problem, I am a student

Do you think this happens?

http://www.summitracing.com/parts/TCI-511205/

[url=http://www.summitracing.com/parts/TCI-511205/][/url]

[afterglow 10]

C4 and have Jim at broaderperformance set it up for you.

[afterglow 10]

C4 and have Jim at broaderperformance set it up for you.

[MikeStang 247]

Stay away from the off the shelf trannies from summit...Not saying they are good or bad, i just know if you get a known good tranny from a friend or something, then just have a local builder do it up for you, in the event you do have trouble you can go to the local guy and have it taken care of, not deal with some customer service guy in Bangladesh, India when you blow out the Sprag :P

The C4 will work but its going to be a bit more to get it to LAST...+2 for Jim, have heard nothing but good about him.

Mike

[MikeStang 247]

Stay away from the off the shelf trannies from summit...Not saying they are good or bad, i just know if you get a known good tranny from a friend or something, then just have a local builder do it up for you, in the event you do have trouble you can go to the local guy and have it taken care of, not deal with some customer service guy in Bangladesh, India when you blow out the Sprag :P

The C4 will work but its going to be a bit more to get it to LAST...+2 for Jim, have heard nothing but good about him.

Mike

[moreHP 10]

Mr Jim

c4 and c6 'be said of, but the C6 has a longer life.

[moreHP 10]

Mr Jim

c4 and c6 'be said of, but the C6 has a longer life.