N2Otorious 10 Report post Posted February 8, 2010 I can normally search and find dang near anything on the net. I've not been able to find a 6" cowl hood is Fiberglass or steel, with the exception of UP22.com(Unlimited Fiberglass), I did a search on the net for the company's name and read nothing but stories of how the hoods don't fit, avoid, etc. etc. Anyone else know of a manufacture of a 6" cowl hood? Quote Share this post Link to post Share on other sites
Pakrat 1,043 Report post Posted February 8, 2010 Have you tried maier racing? I would also try some of the regular Mustang vendors that offer lots of modified items like Mustangs Plus, Mustangs Unlimitied, NPD and CJ Pony. I definitley would thinnk twice about UP22, I have yet to hear anything good about them. In fact there is probably less work involved buying a standard 3" cowl hood and cutting it and increasing the height than making their's fit. Any fiberglass is going to need some work to it anway no matter how good it is, nothing fits right out of the box. Quote Share this post Link to post Share on other sites
N2Otorious 10 Report post Posted February 8, 2010 Have you tried maier racing? I would also try some of the regular Mustang vendors that offer lots of modified items like Mustangs Plus, Mustangs Unlimitied, NPD and CJ Pony. I definitley would thinnk twice about UP22, I have yet to hear anything good about them. In fact there is probably less work involved buying a standard 3" cowl hood and cutting it and increasing the height than making their's fit. Any fiberglass is going to need some work to it anway no matter how good it is, nothing fits right out of the box. Thanks for some names to research, I'll check those now. Quote Share this post Link to post Share on other sites