EastYorkStang 63 Report post Posted April 7, 2008 I put on a Hedman power steering ram lowering bracket to clear my new headers. It pulled out from the bottom of the frame, bent it and is just dangling there. Grade 8 bolts were used which are ok. Frame couldn't take the stress of the increased force. What can I do now? Other then to weld in a new plate to the bottom of the frame what other options do I have? Quote Share this post Link to post Share on other sites
SlimeGold 69 15 Report post Posted April 7, 2008 I would say welding in a plate would be about it. I had a 70 Mach that done the same thing and that's how I fixed it. I welded nuts on the backside of the plate and cut enough of the frame rail out ( just small holes) to allow the nuts room so the plate would mount flat against the botom of the rail when welded. Then bolt the braket on as normal. Quote Share this post Link to post Share on other sites
gsxrken 21 Report post Posted April 9, 2008 http://forums.vintage-mustang.com/showtopic.php?tid/1478199/post/1803599/hl/power+steering++frame/fromsearch/1/#1803599 Quote Share this post Link to post Share on other sites