Saginaw power steering upgrade

[PRADO 10]

I have a 1969 mustang with a 351w. Want to ad a saginaw power steering pump but want to retain my current water pump with passenger side exit. Anybody know ofna mounting bracket i could use? I current have the march pulley serpentine set up with with original pump.

[rwcstang 208]

 

what side is your alternator on driver or passenger?

most traditional p/s setups are on the driver side, NPDlink.com would be your best to source the pump, bracket. you just need to a pulley alignment tool to adjust the pump pulley and align the drive belt. 

[Mach1 Driver 597]

57 minutes ago, rwcstang said:

you just need to a pulley alignment tool to adjust the pump pulley and align the drive belt. 

What tool in particular are you referring to? Belt tension?

[rwcstang 208]

Its a pulley puller: 

https://www.amazon.com/SCITOO-Steering-Removal-Installation-Disconnect/dp/B07KG7DC9W?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A3GW5CKPDHE2JH

to properly align the belts, I also use this one: https://shop.advanceautoparts.com/p/dayco-belt-diagnostic-kit-two-piece-laser-alignment-tool-with-belt-wear-identifier-93874/10030803-p?product_channel=local&store=9892

[Mach1 Driver 597]

36 minutes ago, rwcstang said:

Its a pulley puller: 

https://www.amazon.com/SCITOO-Steering-Removal-Installation-Disconnect/dp/B07KG7DC9W?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A3GW5CKPDHE2JH

to properly align the belts, I also use this one: https://shop.advanceautoparts.com/p/dayco-belt-diagnostic-kit-two-piece-laser-alignment-tool-with-belt-wear-identifier-93874/10030803-p?product_channel=local&store=9892

Thanks, that looks like a cool tool:

 

[RPM 1,248]

Cool indeed, but $100 cool? I've used straight edges with pretty good luck.