Her69fastback 4 Report post Posted September 30 I’m replacing the old front springs and shocks with qa1 & the rear shocks with qa1. I’m looking to up grade the front sway bar & put a rear sway bar on the car. As far as I can tell qa1 doesn’t make sway bars for this car. Who makes good sway bars for this car? It’s a street car no track. Might drag race it a little. Quote Share this post Link to post Share on other sites
RPM 1,249 Report post Posted September 30 I bought this one, and recommend it, many years ago when they were less than half that price. That sway bar and the one inch Shelby drop will make a world of difference in how your Mustang handles. https://www.npdlink.com/product/front-sway-bar-kit-1-18/208686 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,153 Report post Posted October 1 You really don't want to go bigger than 1 1/8 , they will rip the mounting brackets off the frame rails 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
Her69fastback 4 Report post Posted October 1 Thanks for the help Quote Share this post Link to post Share on other sites
fastmerc 0 Report post Posted October 2 A factory 15/16" (428 bar) up front and as big as a 1/2" bar out back was stock for most BB cars in 1970. Competition Handling Package...... These bars and an export brace on the shock towers will really surprise you in handling. It isn't so tight that you'll feel uncomfortable driving it.....feels flat but not brutally so. I Am looking FOR A 7/8" FRONT BAR for a small block build....... Quite a few 70's came with these and hopefully I can find someone that upgraded and hung the old one on the wall! Look into mid 90's Explorers for a rear bar that is fairly simple to adapt to these cars!!! Cheers! Steve Quote Share this post Link to post Share on other sites
RPM 1,249 Report post Posted October 2 When I was building my 69 Mach 1, I planned on using a rear sway bar and had bought one. With a 1⅛ inch front sway bar, 245/40-18 in front and 255/45-18 on the back, I don't need a rear sway bar. My car is neutral thru pretty fast and tight corners. YMMV. 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
bigmal 230 Report post Posted October 2 With my rebuild I used a 1 1/8 front and 3/4 rear as well as Shelby Drop. I found at high speed it oversteered a lot. Removed the rear bar and really happy with the result. 2 Mach1 Driver and RPM reacted to this Quote Share this post Link to post Share on other sites
Midlife 838 Report post Posted October 3 Sway Bars are easily found at your local pubs after drinking heavily... 2 bigmal and RPM reacted to this Quote Share this post Link to post Share on other sites
Rsanter 158 Report post Posted November 3 Most brands of 1” front bar will be fine for a driver car Quote Share this post Link to post Share on other sites
