Does anyone have the diagram/dimensions for converting 351c heads to clevor heads?

[Rsanter 158]

I have some Australian 351c heads I want to convert to “boss” or clevor heads.

the diagram with the machine work used to be in the older ford Motorsport catalogs, but I can’t find my catalogs right now.

if anyone has this information or an older ford Motorsport catalog I would appreciate it

[Midlife 840]

I thought Clevor  was the 351C heads on the Windsor motor...

[Ridge Runner 1,202]

It's in one of my old mustang monthly magazines but I doubt if I could find it ,may have been in the stack the termites got !

I know you have to plug a water passage and I think drill a new one on the intake side . May be able to find it on the internet search mustang monthly 

[Ridge Runner 1,202]

Found this Pic of some of the head work ,the water passage on the combustion chamber side was machined and plugged with a soft plug but I saw some where where the use a threaded plug then machined  it to a flat surface . Then they used I believe a boss 302 intake gasket to get the new water passage on the intake manifold side of the head . I have a pic I  can send in messanger if some one can post it in the forum

[Ridge Runner 1,202]

Well crap ,sorry ,new phone and I haven't figured it out yet couldn't even send a pic in messages !

[jmlay 92]

Not everything your looking for but a few pictures at least.:

https://www.motortrend.com/how-to/30220-clevor-engine/photos/

[Ridge Runner 1,202]

Nice ,that is what I tried to post . 

The mustang monthly issue had a bit more detail but I can't find it 

[RogerC 151]

I have this information. For some reason, the 1st page only posted as a link.

https://i.postimg.cc/8596fRZX/Pictures-20240728-0001.jpg

[RPM 1,269]

19 hours ago, Midlife said:

I thought Clevor  was the 351C heads on the Windsor motor...

You thought correctly.

[Rsanter 158]

6 hours ago, RogerC said:

I have this information. For some reason, the 1st page only posted as a link.

https://i.postimg.cc/8596fRZX/Pictures-20240728-0001.jpg

Thanks, this is what I needed

[Rsanter 158]

What’s the chance anyone near me has a boss302 intake or an aftermarket clevor intake I could borrow for some mock up..?

[Ridge Runner 1,202]

Always wanted to build a boss 302. I had a Nascar  boss 302 once but I stupidly sold it . It had a high nickel content block ,it yellowed but it wouldn't rust .