Wanted: Passenger (R) side Motor Mount Frame Bracket for Small Block

[TexasEd 211]

I pulled my motor mount frame bracket and the Right side is all torn up.  I just need that side.

Thanks

[kblagron 30]

I know I have one but can't remember what side it is from.  I went with Ron Morris, so I don't need it.  Will let you know tomorrow.

[kblagron 30]

I know I have one but can't remember what side it is from.  I went with Ron Morris, so I don't need it.  Will let you know tomorrow.

 

Edit - I have a passenger side bracket from a 1970 Mustang Mach 1 with 351C (at least I think it is as it has an "R" on it).  Let me know.  Price is right - free if you pay shipping.

Tried to upload an image of it here, but no go - see your messages.

[kblagron 30]

See if you can see this photo.  I used a users suggestion on getting it to a URL:

https://ibb.co/TmRwtTN

[RPM 1,269]

He needs the chassis part that the motor mount bolts to, not the motor mount.

[kblagron 30]

11 hours ago, RPM said:

He needs the chassis part that the motor mount bolts to, not the motor mount.

I am pretty sure that is what I posted above -> looks similar to these: https://www.npdlink.com/product/brackets-motor-mount/105035

 

[RPM 1,269]

I misspoke. What I should have said is the part Ed needs is the chassis piece that the part you show bolts to.

[aslanefe 352]

On 7/3/2024 at 2:31 AM, kblagron said:

I know I have one but can't remember what side it is from.  I went with Ron Morris, so I don't need it.  Will let you know tomorrow.

 

Edit - I have a passenger side bracket from a 1970 Mustang Mach 1 with 351C (at least I think it is as it has an "R" on it).  Let me know.  Price is right - free if you pay shipping.

Tried to upload an image of it here, but no go - see your messages.

Do you happen to have the left side bracket also? If Ed does not want it, I can use both sides for a conversion from 6 to 8 cylinder.

[kblagron 30]

No, just the right.  I probably would have run them back if I had the left, but with the cost for new motor mounts and the brackets, I just went with the RM mounts.

[TexasEd 211]

On 7/3/2024 at 8:52 AM, kblagron said:

See if you can see this photo.  I used a users suggestion on getting it to a URL:

https://ibb.co/TmRwtTN

This looks like what I need. Do the 351c and 351w use the same parts?  I know the big blocks are different. 
 

I sent a message with my cell number. 

[TexasEd 211]

The Cleveland and Windsors are the same.  I’ll happily pay for the shipping and I know someone who wants my torn up one so I’ll pass it on.