Trunk Lid And Spoiler Mounts

[Machspeed 219]

Probably a stupid question but, wondering if trunk lids differed between those that received spoilers and those that didn't. I ask because I have an OEM trunk lid and OEM rear spoiler. The trunk lid is deformed at the mounts with no underlying support. You have the outer skin and the inner skin separated by about 1/4".  Even with the correct brackets, this seems like a rather cheesy setup and now one that I have to figure out a fix for. 

 

[Machspeed 219]

Well, apparently there is a difference in deck lids. Late 69 and 70's have an oval cut out. My early 69 does not have this cut out. 

https://www.youtube.com/watch?v=pSb_3pD-MSY

[BobW70Mach1 29]

My original 69 trunk lid did not have the cut out.  My aftermarket lid did.  

[Machspeed 219]

Bob, tell me about your aftermarket lid? Brand and fit? I'm considering a repop trunk lid. In fact, gonna post on this.  

[Mike65 504]

Are you using the spoiler brackets that mount under the trunk lid?

Mustang Spoiler Bracket Rear Mounts Under Deck Lid 1969-1970 (cjponyparts.com)

[Machspeed 219]

My trunk lid is OEM as is the spoiler, both original to the car. Unfortunately, my car is an early 69 build and does not have the oval cutout. I do have a bracket but it is not like that and does not protect the deck from what has transpired in the pictures above. If I recall correctly, the owner that bought the car new had the dealership install all the spoilers and window louvers. Anyway, bought an aftermarket lid tonight that has the correct cut out for that bracket. Keeping my fingers crossed that the aftermarket lid is a good one.