Vicfreg 791 Report post Posted January 13 I’m nearly ready to install my console, it has the Shelby gauge pod installed on it. I have an automatic transmission, and I would like to install the console fully assembled. It’s a pretty tight fit trying to get the console over the automatic shifter. Any lessons learned or suggestions would be helpful!! Vic Quote Share this post Link to post Share on other sites
Brian Conway 272 Report post Posted January 13 If your car had a console originally ? The original mounting screw locations can be viewed from the under the car in the tunnel. Careful to avoid the brake line. Take the seats out. Brian Quote Share this post Link to post Share on other sites
BobW70Mach1 29 Report post Posted January 14 I assume you have already removed the shifter handle? 2 Brian Conway and TexasEd reacted to this Quote Share this post Link to post Share on other sites
TexasEd 200 Report post Posted January 16 Yes, I was going to say remove the shifter handle, you may also want to put chocks under the wheels, parking brake on and then shift it to D. Then take off the T part of the handle, don't let the button fall out. Quote Share this post Link to post Share on other sites
