Busch 8 Report post Posted August 11, 2023 Would somebody with a 70 please take a measurement from the top of the vacuum tree on the firewall to the bottom of the export brace? Also, is the tree roughly in the center of the car or is it a little bit towards the passenger side of the car? Quote Share this post Link to post Share on other sites
jmlay 91 Report post Posted August 11, 2023 I do not believe three is an exact placement. The pictures int he link below are very clear & should give an idea of the location. https://www.deadnutson.com/firewall-vacuum-tree-plug-kit/ 1 69RavenConv reacted to this Quote Share this post Link to post Share on other sites
Busch 8 Report post Posted August 13, 2023 I had assumed those holes were pre drilled. Since I made this thread I’ve poked around the internet a little and found a handful of decent photos. I think for what I’m doing the exact location will not be critical. @jmlay thank you for the link. The pics on the site were excellent, plus I needed that plug kit anyway. Even cooler for me was that Dead Nuts On relocated to PA so shipping to me in VA was very fast. Another member of this forum @buening posted this pretty good pic a while back that showed up in a search. 1 jmlay reacted to this Quote Share this post Link to post Share on other sites
RPM 1,247 Report post Posted August 13, 2023 9 hours ago, Busch said: Even cooler for me was that Dead Nuts On relocated to PA so shipping to me in VA was very fast. Ya, that sucks for us Cali guys as he was just up the road in Fredno. 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites