mikee 51 Report post Posted February 1, 2023 Hi Guys, just a quick question... Finally I found some cam on stock at rockauto: https://www.rockauto.com/en/parts/melling,24211,camshaft,5260 Its Melling 24211 Advertised Exhaust Duration 306 Advertised Intake Duration 300 Basic Operating RPM Range 3000 Cam Type Hydraulic Flat Tappet Computer Controlled Compatible No Exhaust Duration at .050 inch Lift 234 Exhaust Valve Lift 0.520" Exhaust Valve Lift with Factory Rocker Arm Ratio 1.600" Intake Duration at .050 Inch Lift 224 Intake Valve Lift 0.497" Intake Valve Lift with Factory Rocker Arm Ratio 1.600" Lifter Type Hydraulic Lobe Separation 112 Can I use it for stock engine (I just matched intake and exhaust openings on stock heads to gasket size)? Thanks a lot for some reply Quote Share this post Link to post Share on other sites
RPM 1,272 Report post Posted February 1, 2023 I would give one of the cam makers a call with your drive train info. They'll let you know what works best. You can use that info to buy from whomever you want. 1 det0326 reacted to this Quote Share this post Link to post Share on other sites
ClubSport 29 Report post Posted February 1, 2023 At least upgraded valve springs and screw in studs with adjustable rockers. I have this cam from howards , idle 800-850 rpm , 5800-6000 rpm max 2 mikee and bigmal reacted to this Quote Share this post Link to post Share on other sites
mikee 51 Report post Posted February 2, 2023 Damn, that sounds good :) Thanks guys, I'll do it that way - anyway till I came home from work any of that cam was still on stock... Quote Share this post Link to post Share on other sites
