Ridgerunner Sail Panels

[Brian Conway 259]

 

[Mach1 Driver 538]

If he doesn't wander around, you could try StangNet- I haven't asked if its Ridge, but there is a guy on there that seems to fit his profile and goes by "Horse Sence"

[Ridge Runner 1,077]

2 minutes ago, Mach1 Driver said:

If he doesn't wander around, you could try StangNet- I haven't asked if its Ridge, but there is a guy on there that seems to fit his profile and goes by "Horse Sence"

That would be me !

I still make them .

[Brian Conway 259]

OK great.  So I did some reading and your panels seem to be a much better product than what is currently available.   You are recommending insulation?  Will you supply the amount needed? My panel lights are originals and have a metal trim ring.    69 and Black pair.  Cost/method of payment and time frame?   Tanks Brian

[Ridge Runner 1,077]

I only make the panels no insulation  ,i only have white gel coat so must be painted

[TexasEd 180]

On 11/19/2022 at 10:45 PM, Ridge Runner said:

I only make the panels no insulation  ,i only have white gel coat so must be painted

I need new ones too. My interior is dark red and I have some paint for it.

What is your lead time and price?

A couple orders at the same time may make it a batch run and more efficient.

[jjstang 50]

I’d be interested. Messing with the TMI now, not happy……

[rr03cobra 3]

I'm interested too.

[TexasEd 180]

@Ridge Runner

Working on a group order:

• @Brian Conway
• TexasEd
• @jjstang
• @rr03cobra

Maybe others from back earlier in the year:

• @shelbyshelby
• @10shots

 

[Mach1 Driver 538]

I'm in too! With holes please.

[Ridge Runner 1,077]

I only made one mold so it will take me a bit 

[shelbyshelby 52]

Be careful putting insulation in. Least don’t be afraid to minimize it. I ordered the stock replacement and it’s a bit too much, may not be if you trim down, like an inch or 2 all the way around. If I ever need to take mine out, I will try a layer of sound deadner and remove the stock insulation. One more mention. The stock, fuzzy insulation, if I were to use, I’d install it first before painting. Get some over spray on it. That way if any of the panel was held out a smidge, the white insulation wouldn’t be visible. Well damn, yet 1 more mention. The sail needs a little bit of spongy towards the bottom to make it fit against the hockey trim. My originals had a remnant of foam there. I guess my thought would be to minimize the insulation towards the top. 
  I have ridges panels and they fit like a glove. Far superior to the tmi panels imo. Just be conscience of getting too much thickness behind them. 

[Grabber70Mach 104]

What do these run a set? Possibly interested. 

[TexasEd 180]

Ridge answered me by Direct Message he did say they had moongrain finish.  Pretty excited about these, definitely going to get a pair.

[Ridge Runner 1,077]

If interested message me 

[Mach1 Driver 538]

What painting recommendations do you have Ridge? 

[Ridge Runner 1,077]

Scuff with a green scotch brite then either sems satin black or a good quality spray can . You can primer but very lightly or it will fill in the grain 

[Ridge Runner 1,077]

First set is for TexasEd.

They already have the proper curve and moon skin grain ,i made the light holes a bit small just incase you use the new lights ,they are a bit smaller than the originals ,a wood dowl and 80 grit paper will open them up if you need to . 

A strip of foam on the back side at the bottom may be needed to keep them against the hockey stick just like the card board ones have but other than that they slip in under the back window rubber and 1 screw in the front where the small molding is and paint your interior color the pinch on wind lace covers the front just like the card board ones do and thats all thats need to install .