lcleek9@gmail.com 0 Report post Posted October 18, 2022 Had to remove my ignition switch to install the ignition light bracket. I have the body of the switch mounted back into the dash. Everything is properly aligned. I put the key into the tumbler and place it into the switch body but the key will not turn. Now the switch is out of the dash and the key still will not turn. What am I doing wrong. It worked before I removed it. I hate that. Quote Share this post Link to post Share on other sites
jjstang 51 Report post Posted October 18, 2022 From experience can tell they can be messed up really easy. Your best hope it’s a tumbler is sticking. Spraying some lock lube and jiggling or around may fix it. Quote Share this post Link to post Share on other sites
lcleek9@gmail.com 0 Report post Posted October 18, 2022 I got the key to work in the ignition switgch this morning. Sorry for the false alarm. Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted October 18, 2022 so what magic did you work on the key and switch. wiggle right wiggle left or a little of both? Quote Share this post Link to post Share on other sites
