Jump to content
Print Dad

70 master cylinder

Recommended Posts

Hello all,

I feel really stupid because I already did this once about 10 years ago.

so more specs… car is 70 Mach. 351c with 3 speedstck.

drum brakes all around.

I can pull the master cylinder and bench bleed a new on… the part I forget is the rod that hooks to the pedal.

I forget how it attaches… I hope it’s not behind the brake light switch.

last time I replaced the switch it took me hours. Then suddenly it went in.

So I guess I need to know if anyone would leave the rod on the pedal and just replace the master?

I noticed a tiny leak up by the clutch pedal today…inside car…only took about 1/16 of an inch of fluid in back bowl.

frontwas perfect.

 

looking for ideas and thoughts…keep in. Mind im71 and not as nibble as I once was.

Should I just watch this or replace master?e

thanks in advance.   Sam

E7F1026F-E553-4062-976C-FB63449ECC00.jpeg

Share this post


Link to post
Share on other sites

Follow up questions

1. can pull the rod from master cylinder and leave it attached to br!e pedal

2. I know the rod is suppose to attach inside the master cylinder.   But why? Does the brake pedal help pull the “puck” backward

3. Should I just add fluid and keep a eye on things….

4. Why do some master cylinders come with no rod?

idoubt I can work under the dash.. don’t know why 

 

I appreciate ideas tips etc.

sam

Share this post


Link to post
Share on other sites

You didn't say if manual or power assist but from what you describe I assume manual. The manual M/C rod ( the ones I have seen anyway) has a retainer that holds the rod in the M/C in the event that the brake pedal gets pull back farther than its normal retracted position and allowing the rod to come out of the M/C.  

Share this post


Link to post
Share on other sites

Hello Rustback,

thanks for the info and thoughts.

when I replacecthe master it was simple except for installing brake light switch.

i worked a just that for several hours… too tight up there.

when I finally got the switch in it took about a minute.

that is why I was thinking of leaving the rod on the pedal.

You are right manual drum brakes all arounr

not sure what I will do…

thanks again….. sam

 

Share this post


Link to post
Share on other sites

RPM,

a great picture .. thanks a real great pix and if I do have a shop

do the job.. I’ll give it to them.

hard to explain why I may not attempt the job.

plastic time I did it it took about 3 hours and thirty tries.

onthe final attempt it went together sooooosimple

 

just had to get the correct angle.

this has me depressed a bit.. I have wrenched on cars

for 60 years and not much I wouldn’t tackle.

I guess just an issue with my age….

 

thanks. Sam

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...