RPM 1,157 Report post Posted June 27, 2022 I've searched online without much success. I'm trying to find the factory location on the firewall for the green wire to the compressor. Might this image show the correct location? If not, where did it exit? The one thing I'm pretty sure of is if he hasn't already done it, Midlife is gonna block my phone number. :) Thanks again Randy for working on Sunday. Quote Share this post Link to post Share on other sites
aslanefe 320 Report post Posted June 27, 2022 1 hour ago, RPM said: I've searched online without much success. I'm trying to find the factory location on the firewall for the green wire to the compressor. Might this image show the correct location? If not, where did it exit? The one thing I'm pretty sure of is if he hasn't already done it, Midlife is gonna block my phone number. :) Thanks again Randy for working on Sunday. On my 69 with factory air, the green wire to compressor is molded as part of the bundle where NSS and wiper motor wires come out, about 2 inches inboard of the gas pedal cable. 1 1 Caseyrhe and Midlife reacted to this Quote Share this post Link to post Share on other sites
RPM 1,157 Report post Posted June 27, 2022 It's good to get a correct answer, thanks John. I want to run my condenser lines and power on the passenger side, and I've got some firewall holes plugged that I might use for the wiring. I'll finger sumpin out. Thanks again. Quote Share this post Link to post Share on other sites
Rich Ackermann 172 Report post Posted July 6, 2022 On 6/27/2022 at 7:52 PM, RPM said: It's good to get a correct answer, thanks John. I want to run my condenser lines and power on the passenger side, and I've got some firewall holes plugged that I might use for the wiring. I'll finger sumpin out. Thanks again. Here is a picture of the green wire with a black round female plug at the firewall. John is correct it is part of the harness that includes the wipers, tach wire, neutral safety switch, oil and temp sender wires, and PRNDL shifter light. The other end of the green wire should terminate near the airbox blower motor with a single square spade plug, along with a couple of other related green wires with square plugs. 1 RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,157 Report post Posted July 6, 2022 Thanks Rich. Quote Share this post Link to post Share on other sites