Ridge Runner 1,113 Report post Posted April 21, 2022 Be on the look out if you use any of the facebook pages ,yep he got me ! $260 for a 2005 mustang wiring harness . He goes by Lionel Baxter ,Rex Baxter and also Lionel Goodman . He is on several pages and even hit the fox body forum BEWARE! Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 21, 2022 This is the account he uses on pay pal ,it appears his real name may be Lacey Hanson ,yep my sister is tracking his ass down ! Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted April 22, 2022 Scum of the earth. Quote Share this post Link to post Share on other sites
Rich Ackermann 174 Report post Posted April 22, 2022 Thanks for the head-up. I hope you catch that SOB! Scammers like him should be drawn and quartered! Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 22, 2022 He hit another guy for 500 two days ago Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted April 23, 2022 @Ridge Runnerwhich 05 harness are you looking for? Engine I assume from another thread. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 23, 2022 Yep ,mine has a break somewhere in it Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 23, 2022 Has to be for a 2005 gt 4.6 3V and automatic though 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 23, 2022 I Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted April 23, 2022 I fell for two fb scammers, but buy thru PayPal and use a credit card to reverse the charges. A$$holes. Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted April 26, 2022 On 4/22/2022 at 8:42 PM, Ridge Runner said: Has to be for a 2005 gt 4.6 3V and automatic though Give me a few days, I'm checking with someone that might have one. Sorry for the delayed reply. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 27, 2022 That would be nice ,thanks Quote Share this post Link to post Share on other sites
Grabber70Mach 107 Report post Posted April 29, 2022 PM'ed Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 29, 2022 I have one thing to check on first ,it seems the coolant temp sensor can cause all the problems i am having ,from the trouble shooting guide talking about black smoke as one of the symptoms ,none of the other sensors cause this ,i believe that is the problem . Problem is it is under the intake so i have to pull it but that is actually very simple on this motor . These friggen computer cars ,if you look at them funny they will throw a code ! Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 29, 2022 I may have stumbled into the problem ! I took the intake off to get to the temperature sensor and i noticed the inside of the driverside head was coated with gas ,the only way gas could get there is if the intake was leaking where it mates to the head ,the top of the head mounting surface was also coated . I have to wait on a set of gaskets but i think this is it ...maybe ,possible ,could be ! I already cleaned it a bit but you can still see the stain from the gas at the front and second port ,it had a lot more than this . 1 RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted April 29, 2022 Fingers crossed. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 29, 2022 Nope ,same old crap ,i have had enough with it and going back to the oldies but goodies Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted May 21, 2022 I said all along it would be something so stupid you wouldn't even think of it ! When i put the 07 motor into my 05 mustang the 07 harness was still on it ,it wouldnt work in the 05 so i had to change it inside the car ,that wasnt easy because it was almost impossible to get to the tranny sensors . I must have twisted the rear part of the harness,the part with the plug ins for the 02 sensors . I had the bank 1 sensor plugged into the bank 2 02 sensor and the bank 2 sensor plugged into the bank 1 sensor ...does not work that way ! Swapped the plug ins today and its like a new car ,should be ,i replaced every sensor ,spark plugs ,coils and even resealed the intake and throttle body . Now i can finally finish it up and drive ! 3 Grabber70Mach, RPM and Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted May 21, 2022 2 RPM and Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted May 21, 2022 Glad ya fingered it out Jim. Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted May 21, 2022 That's spiffy Ridge! Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted May 21, 2022 Nice looking Mustang. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted May 21, 2022 Hooked my scanner to it and it shows the 02 sensors OK for the first time since i got it running . It did kick into fail safe mode just for a minute and cleared but i think that was because all the sensors hadn't cleared yet ,it still shows the converters not clear but it will take a few miles driving before they do ,it runs great and it does chirp 3 when it shifts haha. 1 stangs-R-me reacted to this Quote Share this post Link to post Share on other sites
EastYorkStang 63 Report post Posted May 23, 2022 So you don’t need a carburetor after all. Nice ! Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted May 25, 2022 It would be a whole hell of a lot easier to work on though Quote Share this post Link to post Share on other sites