Jayster428 0 Report post Posted January 30, 2022 I bought a reproduction 69-70 aluminum shaker and the reproduction base that bolts to the scoop but no screws were supplied. What is the thread size and diameter bolts needed. I have found any SAE screws that work. Could they be, dare I say, metric? Quote Share this post Link to post Share on other sites
det0326 179 Report post Posted January 30, 2022 would not surprise me. lot of after market stuff is metric. Replaced a window regulator and the screw that held the window handle on was metric. Quote Share this post Link to post Share on other sites
EastYorkStang 63 Report post Posted February 1, 2022 Wouldn't the manufacturer know ? Quote Share this post Link to post Share on other sites
EastYorkStang 63 Report post Posted February 1, 2022 On 1/29/2022 at 11:48 PM, Jayster428 said: I bought a reproduction 69-70 aluminum shaker and the reproduction base that bolts to the scoop but no screws were supplied. What is the thread size and diameter bolts needed. I have found any SAE screws that work. Could they be, dare I say, metric? Where did it come from ? Quote Share this post Link to post Share on other sites
Vicfreg 772 Report post Posted February 2, 2022 Are these the 3 screws that attach the actual shaker scoop to the mid-plate? Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 3, 2022 Does the repop use the same screws as the original? Mine are a large maybe #6 or 8 Phillips head sheet metal screw. If so, I can remove one and measure it. Quote Share this post Link to post Share on other sites
Vicfreg 772 Report post Posted February 3, 2022 They’re probably not, I’m out of town when I get home in a week or so I could take a picture of mine, I’m sure somebody on the forum has pictures of an original Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted February 4, 2022 Well, I remembered one thing about the screws, they are a Phillips head. They are 1/4-20×1-1/2" long. This is from an original shaker. 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
