Sal DiMauro 0 Report post Posted October 26, 2021 Has anyone switch from power brakes to wilwood manual master cylinder ? I am going to do that but can I use the same brake pedal, I was told I may need to change the pedal, does anyone know if you need to ? taking any suggestions on the subject Quote Share this post Link to post Share on other sites
Vicfreg 771 Report post Posted October 26, 2021 Hi Sal. There are a lot posts on this topic, and somewhere in the forum archives, a member did a dissertation on all of the various brake pedal combinations. Not sure why you would go to manual brakes, lots of great power brake options out there. Vic Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted October 26, 2021 You'll need to use the appropriate auto or manual transmission and manual brake pedal. 69 & 70 are different. Quote Share this post Link to post Share on other sites
Sal DiMauro 0 Report post Posted October 27, 2021 thanks for the info , I am looking to stay with a power booster just need to find the right combo, I do want to use a wilwood master cylinder, need find a booster that will work Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted October 28, 2021 Be careful mixing parts, plenty of unsatisfied Mustang guys out there because of it. Probably the nicest and most informed guy out there is Dan at Chockostang, ph # 217-882-2083. He knows Mustangs and will do you right. Quote Share this post Link to post Share on other sites