rr03cobra 3 Report post Posted September 29, 2021 I have installed the TCP subframe connectors with the cross brace. Has anyone installed this and do you have a picture of how you routed the exhaust? I purchased Magnaflows exhaust with an x-pipe before I purchased the cross brace. Looks like an h pipe will work but the x pipe is going to be difficult. I sax a picture with an h-pipe just below the transmission and then the pipes routed next to the driveshaft. tia for the help Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted October 1, 2021 Put the X under the trans tail Quote Share this post Link to post Share on other sites
Vicfreg 771 Report post Posted October 12, 2021 PIcs from my '70 Vert. Not sure if it will help or not.... 2 TexasEd and lalojamesliz reacted to this Quote Share this post Link to post Share on other sites
rr03cobra 3 Report post Posted October 27, 2021 nice work. thx for the response guys. I will post pics when its done Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted October 28, 2021 That underside is waaay too clean. Quote Share this post Link to post Share on other sites
Vicfreg 771 Report post Posted October 28, 2021 Yeah....no road miles yet. After Mike (latoracing) got done with the floor work, I had the car put on a rotisserie and media blasted. Did the underside and firewall forward in black satin epoxy. A few years later, still looks great. I used a spray can to touch up underneath when Mike was doing the exhaust. My '68 was done the same way. 10 years later, still looks pretty darn good. Quote Share this post Link to post Share on other sites
rr03cobra 3 Report post Posted December 30, 2021 exhaust is done. thought I would add pictures in case anyone else had the same question Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted December 30, 2021 Don't you love the look into open headers in that first pic? I noticed you wrapped the pipes to keep the temp down- are the pipes stainless? If not I've heard that it traps water and you get rust. Quote Share this post Link to post Share on other sites
rr03cobra 3 Report post Posted January 7, 2022 the pipes are stainless. I didn't want them wrapped but he did it anyways. lol I'll just have to keep an eye on them Quote Share this post Link to post Share on other sites
