StrixVaria 3 Report post Posted September 23, 2021 Hey everyone I have a 1969 Mustang Coupe that I am wanting to do some modifications to. I really like the trunk deck and fender extensions on the 1969 gt350 convertibles. Would a trunk deck from a 1969 gt convertible bolt up to a 1969 coupe or would it take extensive surgery? thanks for any help. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 23, 2021 Same lid ,direct bolt on Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 23, 2021 Thanks for the speedy response Ridge Runner. looks like im in the market for a new deck and some flares. I appreciate it. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted September 23, 2021 Whoa now there Strix, not so fast. Welcome to the forum Mustang brother. Tell us a bit about yourself and your Stang. Ya know, the regular interrogation. Age, where ya live, how long you've owned your 69, what you've done to it, any future mods...Ya, pretty much everything. Oh, and pictures. We love pics. 1 bigmal reacted to this Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 23, 2021 Thanks for the introduction RPM. I live in Redding Ca. I have a 1969 mustang coupe, 351w 4v. fmx automatic with factory air, power steering, power brakes. ive had the car for about 15 years (im 30). Im looking into making it into a gt350/traditional front of a 69. 3 Mach1 Driver, bigmal and RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted September 23, 2021 You are quite welcome. Another damn Californian eh? There are several of us here who feel your pain. Nice looking set of Mustangs. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 23, 2021 Now are you talking about the stock mustang deck lid or the fiberglass Shelby 350 deck lid ? They will still bolt on but you will also have to do the shelby tail panel . The metal tail panel has to be cut out to use the fiberglass over lay panel . But like i said , factory 69 coupe and convertible deck lid and end caps are the same ...70 however has a mid year change to the end caps only that will not work on a 69 ,the deck lid is the same as a 69 Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted September 23, 2021 Nice, another Cali Coupe! nice coupe btw! Welcome to the club! Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 24, 2021 Hey Ridge, I was talking about the fiberglass shelby 350 deck and fender extensions. I kind of want to go for the mexican 350gt look. Quote Share this post Link to post Share on other sites
69NC 21 Report post Posted September 24, 2021 You can have the Shelby trunk and end caps with the stock tail panel. You have to do some filling on the undersides of the end caps. I and a few others on the forum have done it. I can dig some photos up if you need. Oh, Welcome to the forum Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 24, 2021 Thanks 69nc. I would love any photos you have, it would be extremely helpful Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted September 25, 2021 Yeah @69NC some pics would be great. I'm curious now also for my 69 coupe Quote Share this post Link to post Share on other sites
RogerC 136 Report post Posted September 25, 2021 Ridge makes a 69/70 shelby style hood to fit regular 69s & 70s. At least I think he still makes them. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 25, 2021 I am not saying that you cant make it work but the end caps and trunk lid are made to work with the shelby over lay tail panel . The shelby over lay is close to flat while the 69 tail panel is dished so that will have to be glassed in . Without the overlay panel there is also a gap at the top of the end caps and the trunk lid ,with out the over lay the trunk lid over hangs the 69 tail panel by at least 1 3/8 inch ,it also overhangs on the shelby overlay but parts fit up a bit different so it isnt quite as noticable. If you can work with fiberglass it would not be a big deal but not much you can do with the trunk lid over hanging the metal panel . Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 25, 2021 19 minutes ago, RogerC said: Ridge makes a 69/70 shelby style hood to fit regular 69s & 70s. At least I think he still makes them. I still do ,but shipping is a problem Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 26, 2021 @Ridge Runner Does the over lay tail panel replace the stock tail panel? or does it mount over it? im not too sure how that works. Im not opposed to switching from a stock 1969 tail panel. Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 26, 2021 Also I stumbled across this https://fiberglassspecialtiesnv.com/m-218dl-kit-1969-mustang-coupe-fiberglass-decklid-and-pair-of-extensions/ but I have not seen any finished results from anyone. not sure if this is a good quality product. Anyone have any experience with fiberglassspecialties? Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 26, 2021 12 hours ago, StrixVaria said: @Ridge Runner Does the over lay tail panel replace the stock tail panel? or does it mount over it? im not too sure how that works. Im not opposed to switching from a stock 1969 tail panel. It mounts over the metal panel ,but the center of the metal panel has to be cut out Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted September 27, 2021 7 hours ago, Ridge Runner said: It mounts over the metal panel ,but the center of the metal panel has to be cut out Do you have any pics of them installed?1 Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 27, 2021 I am not sure if i do ,i lost most of my pics in an up date that deleted almost everything in my images Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 27, 2021 I have one good pic of a convertible i built ,and a few of my ex fastback ,there is about a 1 inch boarder around the tail light panel that stays ,the rest cuts out . Coupe ,convert and fastback will all be done the same way 1 StrixVaria reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 27, 2021 One more with the trunk lid open 1 StrixVaria reacted to this Quote Share this post Link to post Share on other sites
69NC 21 Report post Posted September 27, 2021 Not the best pictures, but you can see where additional fiberglass is added to make the end caps match the tail panel. 1 StrixVaria reacted to this Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted September 27, 2021 Ok ,you are working with a 70 ? A bit different than working with a 69 ,70 has a flat tail panel 69 is dished requiring a bit more work . 1 StrixVaria reacted to this Quote Share this post Link to post Share on other sites
StrixVaria 3 Report post Posted September 27, 2021 @Ridge Runner Thanks for the photos, I think it may be easier for me to get the tail light panel for a gt350 and cut mine out like the photos you provided. Where did you get the trunk lid, end caps and tail light panel? Quote Share this post Link to post Share on other sites