jjstang 51 Report post Posted August 30, 2021 Of course most of the older pictures are not on the site anymore...... Does anyone have pictures of how they routed the harness under the dash? TIA Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted August 30, 2021 Look on this site, in 'How tos", 1969 Mustang Wire Diagram, page 2-E2 and 3 Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted August 30, 2021 I routed my AAW wiring harness in the factory location, here are a couple pics. Quote Share this post Link to post Share on other sites
jjstang 51 Report post Posted August 30, 2021 Thanks so much. I was also curious about the relay block, where you mounted it. Looks like you broke it up into separate pieces?? Quote Share this post Link to post Share on other sites
Vicfreg 771 Report post Posted September 12, 2021 I have some. I will post them. I put the relay block on top of the steering column. Quote Share this post Link to post Share on other sites
Vicfreg 771 Report post Posted September 12, 2021 Quote Share this post Link to post Share on other sites
Mike65 475 Report post Posted September 12, 2021 Here is a better picture to show where I mounted the relay block & the electric fuel pump inertia cutoff switch. I am using a trans tunnel mounted parking brake so I made a bracket & mounted the relays & the cutoff switch where the foot brake originally mounted. Quote Share this post Link to post Share on other sites