69 dash cluster pin out diagram/help needed

[notyepcars 10]

 Does anyone have a cluster pin out that would show where each pin goes.  My car has a tach, and the wiring diagrams I have purchased do not show this. Top and bottom pins on each side are not used, pins 1,9 and 10 and 18.  The other 14 have wires going to them.  I really need to know which numbers are grounds, and where they are grounded.  Any help would be great.  Thanks 

[Mach1 Driver 560]

Midlife makes harnesses to replace the flex circuit, so he would have that. Contact Randy at: http://midlifeharness.com/

[Midlife 814]

I responded to OP's e-mail.  If anyone else needs this info, let me know and I can post it here as well.

[Brian Conway 264]

I'd like to see a picture/diagram of that.  69 Tach car w/oil-alt lights and temp-fuel gauges.  Thanks,  Brian

[Midlife 814]

Here ya go:

[Brian Conway 264]

Thank you.  Reading the panel at my home is a bunch easier and makes more sense.  Got another trivia question ?  Two unused/vacant connectors at the firewall ?  Auto shifter illumination and the other is AC compressor ?  Which is which or something else entirely ? Brian

[Midlife 814]

Green wire is definitely AC compressor lead.  Brown wire is PRNDL lamp lead.  On a 70, there is an additional white female plug which is RUN-only for the carb anti-stall device.

[Brian Conway 264]

Great. Thank you for the help and for clearing that up for me.  Brian