Rear torque box area for jack stands bad idea?

[lalojamesliz 56]

I'm getting my 69 ready to install the coilover kit I ordered with the 3 link and I need to put the rear jack stands where I could leave them for a extended time (like a month+) and not have them in the way for the install or it could mess something up. 

I installed convertible inner rockers but I still need to be sure. 

Is this a safe place?

Thanks guys

[lalojamesliz 56]

I moved it a tad on this picture 

[RPM 1,190]

You gonna be able to get to the front leaf bolts with the stands there? That front leaf bolt is also where your rear lower control arms mount right? For a while I had the rear of my 69 supported at the back end of the frame rails. I've also supported the rear at the front of the rear frame rails. With your chassis stripped it doesn't weight much. 

[Ridge Runner 1,112]

You can move towards the front more if you place a piece of wood on top of the stand to spread out the load 

[pw520a 19]

wouldn't supporting it where the tire jack would go on the pinch weld work? that is how i lift with a quick jack     maybe I'm doing it wrong?  

[Mike65 475]

When the rear end was out of my Coupe I supported it there for a while, I just put a piece of 3/4" plywood between the rear torque box & the jack stand.

[lalojamesliz 56]

Sorry guys, I've been busy with the 69

Thanks for the tips on the wood.