rwcstang 201 Report post Posted July 2, 2021 Received an email from my Machine Shop that there is a delay in my heads. Air Flow Research Heads Announces Investment by Taglich Private Equity Air Flow Research is excited to announce that Taglich Private Equity, LLC (TPE) has acquired AFR. TPE is a lower middle-market PE firm that specializes in recapitalizations, management buyouts, and majority equity investments, targeting manufacturing, business services and consumer products companies. Taglich looks to partner with management teams that can take advantage of their expertise and background in order to optimize their company's growth potential and create long-term value. AFR’s management team and employees will continue to operate out of its Valencia, CA facility, continuing to provide high quality, performance cylinder heads, service, parts, and machining associated with the AFR brand. Nothing will change; it will be business as usual. As President, Board Member and significant investor, Rick will continue to be involved with the organization, ensuring the foundation that his family and employees have built over the past 50 years will flourish under TPE’s guidance. Taglich and AFR are excited about the growth prospects both organically and through future acquisitions of other aftermarket performance companies. 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted July 2, 2021 Hmm... how often do buyouts end well? I mean for anyone that didn't get a big check. Quote Share this post Link to post Share on other sites
EastYorkStang 63 Report post Posted July 2, 2021 I can see the new company tacking on massive debt and or taking out whatever cash they have. Then setting the company on a downward spiral. It never ends good. Quote Share this post Link to post Share on other sites
BigDuke6 17 Report post Posted July 17, 2021 On 7/3/2021 at 12:50 AM, EastYorkStang said: I can see the new company tacking on massive debt and or taking out whatever cash they have. The setting the company on a downward spiral. It never sends good. Just look at Remington and Colt and what the PE vultures did to them. Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted July 17, 2021 Too bad, I intended to go with AFR, but I'll be looking at Trick Flow when engine building time comes. Dang, TF combustion chamber volume is less, gotta look for different pistons now too. Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted July 19, 2021 Just out of curiosity, why would this keep anyone from getting afr heads? As long as they don't start messing with the designs then they should be fine right? Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted July 19, 2021 7 hours ago, lalojamesliz said: Just out of curiosity, why would this keep anyone from getting afr heads? As long as they don't start messing with the designs then they should be fine right? Correct, but that never happens. It took a while for AFR to get it together. For a while they were known for bad springs, but they improved, and now there is no place to go but back down. Investors want a return on their dollar, and that means cost cutting. Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted July 19, 2021 40 minutes ago, Mach1 Driver said: Correct, but that never happens. It took a while for AFR to get it together. For a while they were known for bad springs, but they improved, and now there is no place to go but back down. Investors want a return on their dollar, and that means cost cutting. Bad springs you say? I didn't know that. I'm glad I swaped the springs to the one I got from Chris Staub Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted July 19, 2021 6 hours ago, Mach1 Driver said: Correct, but that never happens. It took a while for AFR to get it together. For a while they were known for bad springs, but they improved, and now there is no place to go but back down. Investors want a return on their dollar, and that means cost cutting. yep, currently still awaiting for my AFR 205 heads to arrive. I was suppose to get it mid July and now its being pushed back to August. Kinda frustrating, but with this current buy out, I believe all production may have stopped. Most likely, all top tier heads will be pushed to be manufactured in a different state out of CA where it is cheaper or have it made in China as their low tier heads are being massed produced there. Currently looking at other options, i.e Trick Flow, but they are back ordered until October or next year. seems all Manufacturing are delayed until next year, Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted July 19, 2021 22 minutes ago, rwcstang said: yep, currently still awaiting for my AFR 205 heads to arrive. I was suppose to get it mid July and now its being pushed back to August. Kinda frustrating, but with this current buy out, I believe all production may have stopped. Most likely, all top tier heads will be pushed to be manufactured in a different state out of CA where it is cheaper or have it made in China as their low tier heads are being massed produced there. Currently looking at other options, i.e Trick Flow, but they are back ordered until October or next year. seems all Manufacturing are delayed until next year, This seller on eBay has the ones I have in stock https://www.ebay.com/itm/280641518937?hash=item415789bd59:g:cEcAAOSwKtlWls50 Or are you looking for the 58cc https://www.ebay.com/p/16017008686 Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted July 20, 2021 thanks for the link, going to work with my Machine shop to confirm what CC heads they need. Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted July 20, 2021 I don't remember if it was the guys over at Staub or at JGM that told me to stick to 10:1 or 10:5.... whatever I have. I was considering a higher compression but they told me with this it'll be powerful and run off of 91 octane so I won't have to worry about finding a e85 station. There's only 1 in Bakersfield that I know of. Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted July 21, 2021 4 hours ago, lalojamesliz said: so I won't have to worry about finding a e85 station. There's only 1 in Bakersfield that I know of. Pretty sure you gotta modify your carb, or get one meant for E85. EFI cars can run it. The Shell at White Ln & Gosford has E85. Quote Share this post Link to post Share on other sites
lalojamesliz 56 Report post Posted July 21, 2021 Yup, after I decided on normal 10:something compression I ordered the carb. That's the one my friends go to. I see it when I drive home from my job all the time. This village is lacking more e85 stations and charging stations Bob Quote Share this post Link to post Share on other sites
rwcstang 201 Report post Posted July 23, 2021 well good news from my engine builder, He was able to source a set of AFR 205s. so thats something off the waiting list of parts Im waiting for. Quote Share this post Link to post Share on other sites
1969_Mach1 333 Report post Posted July 23, 2021 On 7/2/2021 at 10:59 AM, RPM said: Hmm... how often do buyouts end well? I mean for anyone that didn't get a big check. Yeah, it doesn't sound good. I think I'd look for something else if I were in the market for cylinder heads. Quote Share this post Link to post Share on other sites