Billy down under 0 Report post Posted June 18, 2021 Hi Gang I cannot find 1970 coupe deck filler panel , only available for a fastback or conv , wondering if a 68 coupe will fit , also no listing for trunk hinges or pins , again only for fastback , would love to know what anybody has done to modify or source cheers Billy from down under Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 18, 2021 69 70 is all to its self ,67 68 filler will not work . I dont think they are being reproduced so your best bet is to find a donor car Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 18, 2021 Can you piece in a convertible filler or is yours gone around the back window? Quote Share this post Link to post Share on other sites
RPM 1,190 Report post Posted June 18, 2021 Slow down a bit there Billy. How about an introduction, where ya from, (where abouts down under, plenty of members from Oz) and especially pics of her Mustang! Oh, and welcome to the forum! Quote Share this post Link to post Share on other sites
Billy down under 0 Report post Posted June 18, 2021 Sorry didn't know protocol on forum Billy from Melbourne , Australia , weird why you cant get filler for 70 you can get just about everything else , seems like a problem area the is commonly rusted out attached pic as you can see its totally missing Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted June 18, 2021 I have a junker 70 here but it is also rusted out Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted June 18, 2021 69-70 coupes are not sought after yet, so not every part is reproduced. You have to find a donor or fix what you have. Quote Share this post Link to post Share on other sites
Billy down under 0 Report post Posted November 22, 2021 hey guys chasing a 1970 coupe deck filler panel _ anybody have a donor car they could cut piece out of billy from down under Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted November 23, 2021 5 hours ago, Billy down under said: hey guys chasing a 1970 coupe deck filler panel _ anybody have a donor car they could cut piece out of billy from down under Hi mate, I just looked at my 70 vert and 70 coupe and I believe 69/70 vert filler deck can be modified to work on a coupe. As both vert and coupe use the same trunk lid, the aft edge and sides should be the same on both panels. Only difference is at the front edge and you can turn the vert edge down or cut and add a section to the front edge to match the coupe. If you have a good metal guy in your area (or if you are good at metal work), it can be done with relative ease if you can't find a donor car. But usually donor cars would have been sitting out in the elements and that area holds water and rot away unless the car was kept out of the elements. Can post pictures of the front edge on my 70 vert and coupe if you need. Quote Share this post Link to post Share on other sites
Billy down under 0 Report post Posted November 24, 2021 Thankthanks for the info aslanefe Quote Share this post Link to post Share on other sites