Search the Community
Showing results for tags 'slave cylinder'.
Found 1 result
Problem with mounting slave cylinder bracket
JayEstes posted a topic in 1969-70 Technical ForumAll, I am restoring my 69, and currently in process of cleaning up the frame so I can paint and treat with undercoat (all functional parts removed from frame). When I removed the stock slave cylinder bracket from the underside of the main beam (drivers side), it had 3 bolts holding it in place. One on the inside going in horizontally, and two going in (more or less) vertically (through the bracket) up into frame. One of the fasteners on the underside, was a bolt that goes into a nut (or nut plate) that was held fast in the frame. The other- oddly - was a bolt with a head on the inside of the frame, and a nut on the underside (outside). My problem is that this second fastener (a bolt with a head on the interior of the frame) on the underside is loose inside the frame. It has "some metal" attached to the head (can't see it), it can be freely turned, but can't come out of the frame - best I can tell. It's kind of hard to describe, so go to this video so you can see the area and the bolt in the frame: I'm baffled how this went together in the first place, AND how to fix it. If you have a solution or advice - I would greatly appreciate it. Jay