Search the Community
Showing results for tags 'coil'.
Found 2 results
I've been looking for an artful was to mount my coil to the front of the driver side cylinder head. The bolt holes are 7/16, which is too big for the stock style coil bracket. Then I read about Boss 302 having their coils in the same place, and using some sort of adapter plate. Anyone have a picture of one? I'm not sure why a plate is needed, particularly if the plate is metal... it will still transfer heat. What about another material... say the stuff they make carb spacers out of? Phenolic material? Darn oil filled vertical only coils...
Hello everyone, I have a msd blaster 2 ignition coil with a 6AL and an MSD distributor on my 302 engine. When I take the car out for long drives (4 to 5 hrs on highway at 70 mph) everything runs great. When I leave the car in the driveway running for 30 min or longer the ignition coil gets very hot and the engine stalls. Impossible to start it up again until it cools off. Could anyone give me some insight on what the problem may be? Never misfires and timing seems to be spot on. Thanks in advance for your time and help. All the best from sunny Italy! Paul