Search the Community
Showing results for tags 'c4'.
Found 3 results
So I recently pulled my transmission for some work. This is the original C4 that came with the 69 vert. It has been redone within the past 6 years, so there wasn't much I needed to do with it. I changed the servos, installed a shift kit, inspected and reinstalled the tranny. I currently have a major leak around the low/reverse servo cover. It seems to be coming from the top of the cover. I removed the cover yesterday and installed a new seal, reinstalled the cover, and still have a leak (albeit a slightly smaller one!). I've heard that using Loctite 518 around the seal and bolt holes will do wonders to cure this. Have any of you tried this before? I had pulled the tranny because it was having trouble going into reverse, and would not go into 1st gear. The install went well, and I even backed it out of the garage, which is when my son noticed the large amount of fluid coming out from under the car! :) Thanks!
From Kenneth Collins on his FB page https://www.facebook.com/groups/badshoe/ "I’m extending my special deal through Dec. 2017, I’m offering a $5.00 discount on all single DVD and download titles. They are now $25.95 for download or $30.95 for US sales ($50.95 on Canadian sales) with shipping included. To take advantage of this deal, simply select one title under the special deal discount link, thanks……Ken." Bad Shoe Productions How To Video Series - Ford Transmissions & Rears I am only a happy customer having purchased his FMX video's and having Ken reply to my stupid transmission questions on his FB page. You may ask him questions too, even if you have not purchased any of his products.
Hi all, I have a 4R70W automatic trans in my 69. I tried to adapt the original 69 Ford shifter, but the gate will never be correct. PRND12 is in different locations on the 69 shifter throw. It's beyond my fabrication skills to fix it. I was able to get the linkage figured out to drive the car, but its not safe until the gate and reverse lockout work properly. Who has installed an aftermarket shifter in their 69 or 70 irrregardless of trans model? Has anyone been able to do it without cutting up the center console? Thank you. John