hawkdriver

Relic, Hopefully this helps. I have a coupe that had one missing, and what i came up with after asking on multiple forums and calling CJ Pony is that they do not reproduce that part and the FB pieces do not fit. I found mine from someone on here that was helping me out in this matter had one lying around. I have a right side window piece, not the best shape but it covers the gap, don't know what your looking for. As far as the WX stripping goes, it rests on the rear window, the chrome attaches directly to the door window. Hope this helps your situation. If anyone is reading and knows how to properly secure this chrome strip to the side door window i would love to know.

Looking for 3 piece chrome 1/4 ornaments (pair)?

Ok, In the process of replacing my door handles. (Driver Side) door latched is in the closed position (door open) and it will not unlatch. I ensured it is not locked. I obviously had the door panels off to replace the latch so i can get to the inside of the latch, i lubricated the latch from the inside. I ensured that all the rods are properly connected and the push button on the latch does move the push rod when pressed. I cannot figure this one out but now my door wont latch. Im looking to get this handled and buttoned up tomorrow with this great PA weather. Please help. James

dont need them but what else you got

This is what im looking for. Pictures would be great

Looking for 1/4 panel ornaments (3 peice ) pair. Pics would be great James

Yep that be me, Do you have pics. This is what im looking for

Yep that be me, Do you have pics. This is what im looking for

Does anyone have decent coupe quarter panel emblems (pair)? Or MSD Coil?

Does anyone have decent coupe quarter panel emblems (pair)? Or MSD Coil?

Does anyone have decent coupe quarter panel emblems (pair)? Or MSD Coil?

Ok i got into the column to the turn signal switch to do some voltage testing and came up with this scenario. When green orange lead (driver side tail) had power when brake applied but none when blinker was applied, it also had power with hazards. What do you think bad turn signal switch? And replace?

Ok i got into the column to the turn signal switch to do some voltage testing and came up with this scenario. When green orange lead (driver side tail) had power when brake applied but none when blinker was applied, it also had power with hazards. What do you think bad turn signal switch? And replace?

Ok i got into the column to the turn signal switch to do some voltage testing and came up with this scenario. When green orange lead (driver side tail) had power when brake applied but none when blinker was applied, it also had power with hazards. What do you think bad turn signal switch? And replace?

Ok im sorry bout the confusion, let me try to clarify. I cut the sockets of the original tail lights to wire the LED boards, Hooked up as directions state, nothing. So took it apart and tried to diagnose. The problem is the left turn signal (driver side) No functions work on it ( Hazards, brake, or running) the right light works as advertised. I know this because i hooked back up the originals. I have tested all wire w/ volt meter. Right "orange" wire spikes as the blinker blinks. The left "green" wire does not, however the constant black (which i presume would be the running light has 12V give or take) just no volts on green wire. The front driver side blinker works as well. Additionally i checked out the brake switch and it seems to work normally (i even attached a 3rd brake light for the rear window off that and it works as well). Hope this clarifies some of the confusion. My next trouble shoot would be turn signal switch? I did replace the steering wheel many months back so that driver side turn signal may have gotten bumped or disconnected. I honestly do not know if the signal worked originally, i bought the car just prior to a deployment a little over a year ago, i got home last month and attempted the led install without ever driving or un-garaging the car, so i cannot say if it ever did work. I will look into checking the wire under the running board on sunday. Where does it originate from The brake switch or turn signal cam? so i can start at the beginning. Thanks again

Ok im sorry bout the confusion, let me try to clarify. I cut the sockets of the original tail lights to wire the LED boards, Hooked up as directions state, nothing. So took it apart and tried to diagnose. The problem is the left turn signal (driver side) No functions work on it ( Hazards, brake, or running) the right light works as advertised. I know this because i hooked back up the originals. I have tested all wire w/ volt meter. Right "orange" wire spikes as the blinker blinks. The left "green" wire does not, however the constant black (which i presume would be the running light has 12V give or take) just no volts on green wire. The front driver side blinker works as well. Additionally i checked out the brake switch and it seems to work normally (i even attached a 3rd brake light for the rear window off that and it works as well). Hope this clarifies some of the confusion. My next trouble shoot would be turn signal switch? I did replace the steering wheel many months back so that driver side turn signal may have gotten bumped or disconnected. I honestly do not know if the signal worked originally, i bought the car just prior to a deployment a little over a year ago, i got home last month and attempted the led install without ever driving or un-garaging the car, so i cannot say if it ever did work. I will look into checking the wire under the running board on sunday. Where does it originate from The brake switch or turn signal cam? so i can start at the beginning. Thanks again

Ok im sorry bout the confusion, let me try to clarify. I cut the sockets of the original tail lights to wire the LED boards, Hooked up as directions state, nothing. So took it apart and tried to diagnose. The problem is the left turn signal (driver side) No functions work on it ( Hazards, brake, or running) the right light works as advertised. I know this because i hooked back up the originals. I have tested all wire w/ volt meter. Right "orange" wire spikes as the blinker blinks. The left "green" wire does not, however the constant black (which i presume would be the running light has 12V give or take) just no volts on green wire. The front driver side blinker works as well. Additionally i checked out the brake switch and it seems to work normally (i even attached a 3rd brake light for the rear window off that and it works as well). Hope this clarifies some of the confusion. My next trouble shoot would be turn signal switch? I did replace the steering wheel many months back so that driver side turn signal may have gotten bumped or disconnected. I honestly do not know if the signal worked originally, i bought the car just prior to a deployment a little over a year ago, i got home last month and attempted the led install without ever driving or un-garaging the car, so i cannot say if it ever did work. I will look into checking the wire under the running board on sunday. Where does it originate from The brake switch or turn signal cam? so i can start at the beginning. Thanks again

Looking for some help here. I recent bought sequential led tail lights which require cutting of the stock connector and wiring which i could not get to work. So as it stands now no tail light sockets are connected. So heres what i got, power to right brake/turn and when headlights on running light power. Nothing on the right. I have tested the right wires both running and turn signal when applied have no power. I reconnected the stock sockets and bulbs to ensure that they were not working and to no surprise the right side was inop. Looking for advise on where to start testing and or replacing if necc. (69 coupe) Thanks in advanced

Looking for some help here. I recent bought sequential led tail lights which require cutting of the stock connector and wiring which i could not get to work. So as it stands now no tail light sockets are connected. So heres what i got, power to right brake/turn and when headlights on running light power. Nothing on the right. I have tested the right wires both running and turn signal when applied have no power. I reconnected the stock sockets and bulbs to ensure that they were not working and to no surprise the right side was inop. Looking for advise on where to start testing and or replacing if necc. (69 coupe) Thanks in advanced

Looking for some help here. I recent bought sequential led tail lights which require cutting of the stock connector and wiring which i could not get to work. So as it stands now no tail light sockets are connected. So heres what i got, power to right brake/turn and when headlights on running light power. Nothing on the right. I have tested the right wires both running and turn signal when applied have no power. I reconnected the stock sockets and bulbs to ensure that they were not working and to no surprise the right side was inop. Looking for advise on where to start testing and or replacing if necc. (69 coupe) Thanks in advanced

please do

Still have?

Looking for a few things for my coupe hoping you folks could help me out here. Fist is grill molding center wide, next would be quarter panel ornaments both sides. I may be interested in much more i just don't know yet. Can anyone help me out with this. Thanks

Here is a pic of 351 emblems. And what i believe to be original. Might you know where i can get a set from i have been searching with no luck

Here is a pic of 351 emblems. And what i believe to be original. Might you know where i can get a set from i have been searching with no luck