Willy 1

Turned out it was the splice on both sides. Cured. Thanks for the help

Mack1 Driver thanks for the reply. I was hoping it had nothing to do with the firewall plug. It does look almost impossible to get at. I will check the splice out before I try the plug. Thanks again

Hi everyone I am new here. Been lurking and reading information for awhile. Now I have a issue. Working on my 69 mk1 took the front end apart fenders off yanked the motor cleaned repainted the engine area and complete undercarriage. Replaced the area under where the battery sits. Anyway got it all back together and can't get the front sidemarker lights to work. No juice going to them. If it was a ground issue should there not still be juice to the light though they may not work due to poor ground? I do have head lights and signal lights. From the firewall to the markers is one continuous harness so it is not plugged together wrong. Any ideas what to check to remedy this. Thanks